期刊文献+

Stress concentration factor expression for tension strip with eccentric elliptical hole 被引量:1

Stress concentration factor expression for tension strip with eccentric elliptical hole
下载PDF
导出
摘要 Two explicit expressions of the stress concentration factor for a tension finite-width strip with a central elliptical hole and an eccentric elliptical hole, respectively, are formulated by using a semi-analytical and semi-empiricai method. Accuracy of the results obtained from these expressions is better, and application scope is wider, than the results of Durelli's photo-elastic experiment and Isida's formula. When eccentricity of the elliptical hole is within a certain range, the error is less than 8%. Based on the relation between the stress concentration factor and the stress intensity factor, a stress intensity factor expression for tension strips with a center or an eccentric crack is derived with the obtained stress concentration factor expressions. Compared with the existing formulae and the finite element analysis, this stress intensity factor expression also has sufficient accuracy. Two explicit expressions of the stress concentration factor for a tension finite-width strip with a central elliptical hole and an eccentric elliptical hole, respectively, are formulated by using a semi-analytical and semi-empiricai method. Accuracy of the results obtained from these expressions is better, and application scope is wider, than the results of Durelli's photo-elastic experiment and Isida's formula. When eccentricity of the elliptical hole is within a certain range, the error is less than 8%. Based on the relation between the stress concentration factor and the stress intensity factor, a stress intensity factor expression for tension strips with a center or an eccentric crack is derived with the obtained stress concentration factor expressions. Compared with the existing formulae and the finite element analysis, this stress intensity factor expression also has sufficient accuracy.
作者 罗林 向宇 王启智 Lin LUO;Yu XIANG;Qi-zhi WANG(State Key Laboratory of Hydraulics and Mountain River Engineering,Chengdu 610065,P.R.China;Department of Civil Engineering and Applied Mechanics,Sichuan University Chengdu 610065,P.R.China)
出处 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2012年第1期117-128,共12页 应用数学和力学(英文版)
基金 supported by the National Natural Science Foundation of China (No. 51179115)
关键词 stress concentration factor explicit expression eccentric elliptical hole central elliptical hole tension finite-width strip semi-analytical method stress concentration factor, explicit expression, eccentric elliptical hole central elliptical hole, tension finite-width strip, semi-analytical method
  • 相关文献

参考文献7

二级参考文献49

  • 1苏虹,孙锁泰,赵国旗.有限宽正交异性薄板应力集中的试验研究[J].复合材料学报,1995,12(4):94-98. 被引量:2
  • 2西田正孝.应力集中[M].北京:机械工业出版社,1986.300.
  • 3徐芝纶.弹性力学(上册)[M].北京:人民教育出版社,1978..
  • 4萨文Г H 卢鼎霍(译).孔附近的应力集中[M].北京:科学出版社,1958..
  • 5谢鸣九 焦坤芳 张瑜 等.碳纤维环氧复合材料层板的应力集中系数研究[J].航空学报,1988,9(6):233-239.
  • 6Kolosov V. On the application of complex function theory to plane problem of the mathematical theory of elasticity [D]. Doctoral Dissertation, Dorpat University, Tactu, 1909. (in Russian).
  • 7Muskhelishvili N I. Some basic problems of the mathematical theory of elasticity [M]. Holland: Noordhoof Leyden, 1953.
  • 8Neuber H. Theory of notch stresses [M]. Berlin: Springer-Verlag, 1958.
  • 9Westergaard H M. Bearing pressures and cracks [J]. Journal of Applied Mechanics, 1939, 6: A49-A53.
  • 10Irwin G R. Analysis of stresses and strain near the end of a crack transversing a plate [J]. Journal of Applied Mechanics, 1957, 24:361-364.

共引文献68

同被引文献10

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部