期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

双轴转台几何误差数学建模与解耦研究

Study on mathematical modeling and decoupling of geometric errors of 2-axis tilting-rotary table
下载PDF
导出
摘要 通过雷尼绍激光干涉仪与RX10回转基准分度器对A轴与C轴的定位误差进行检测与补偿,使得几何误差总数由10项减少为6项,使得数学模型得到了极大简化。因此,最终可以通过几何误差数学模型求得各几何误差值。 By using Renishaw laser interferometer and RX10 reference rotary indexer to measure two position errors of A axis and C axis, the amount of geometric errors reduced from ten to six, then geometric errors can be obtained by solving geometric errors mathematical modeling finally.
作者 高秀峰 刘春时 李焱 林剑峰
机构地区 沈阳机床(集团)设计研究院有限公司
出处 《制造技术与机床》 CSCD 北大核心 2012年第1期75-78,共4页 Manufacturing Technology & Machine Tool
基金 "高档数控机床与基础制造装备"科技重大专项:高速/复合数控机床及关键技术创新能力平台(2011ZX04016-021)
关键词 双轴转台 几何误差 数学模型 解耦 2-axis Tilting-rotary Table Geometric Errors Mathematical Modeling Decoupling
分类号 TG502.1 [金属学及工艺—金属切削加工及机床]
  • 相关文献

参考文献2

  • 1王民,胡建忠,昝涛,费仁元.五轴数控机床运动误差建模与测试技术[J].北京工业大学学报,2010,36(4):433-439. 被引量：11
  • 2MASAOMI Tsutsumi, AKINORI Saito. Identification of angular and po- sitional deviations inherent to 5-axis machining centres with a tilting-ro- tary table by simultaneous four-axis control movements[J]. Internation- al Journal of Machine tools&Manufacture, 2004,44 : 1333-1342.

二级参考文献17

  • 1FLORUSSEN G H J, DELBRESSINE F L M, MOLENGRAFT M J G, et al. Assessing geometrical errors of multi-axis machines by three-dimensional length measurements [J]. Measurement, 2001, 30(4): 241-255.
  • 2HOCKEN R J. Technology of machine tools volume5 machine tool accuracy[ R]. California, USA: Lawrence Livermore National Laboratory, 1980: 1-85.
  • 3BRYAN J B. A simple method for testing measuring machines and machine tools, part Ⅰ: principle and applications[J]. Precision Engineering, 1982, 4(2): 61-69.
  • 4KIRIDENA V S B, FERREIRA P M. Kinematic modeling of quasistatic errors of three-axis machining centers [J]. International Journal of Machine Tools & Manufacture, 1994, 34( 1 ) : 85-100.
  • 5FERREIRA P M, LIU C R. A contribution to the analysis and comperisations of the geometric error of a machining center[J]. CIRP Annals-Manufacturing Technology, 1986, 35 ( 1 ) : 259-262.
  • 6FERREIRA P M, LIU C R. A method for estimating and compensating quasistatic errors of machine tools[ J]. Journal of Engineering for Industry, 1993, 115( 1 ) : 149-157.
  • 7NI J. CNC machine accuracy enhancement through real-time error compensation [J]. Journal of Manufacturing Science and Engineering, 1997, 119(4): 717-725.
  • 8TSUTSUMI M, SAITO A. Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting rotary table by simultaneous four-axis control movements[J]. International Journal of Machine Tools & Manufacture, 2004, 44 (12-13) : 1333-1342.
  • 9WEIKERT S, KNAPP W. R-test, a new device for accuracy measurements on five axis machine tools [J]. Annals of the CIRP, 2004, 53 ( 1 ) : 429-432.
  • 10LEI W T, HSU Y Y. Accuracy test of five-axis CNC machine tools with 3D probe - ball, part Ⅰ: design and modeling[J]. International Journal of Machine Tools & Manufacture, 2002, 42 (10) : 1153-1162.

共引文献10

制造技术与机床
2012年 第1期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部