2Materials and Fabrication of 2 1/4Cr-lMo, 2 1/4Cr-IMo- 1/4V,3Cr-IMo, and 3Cr-IMo-1/4V Steel Heavy Wall Pressure Vessels for High-temperature,High-pressure Hydrogen Service, API RECOMMENDED PRACTICE 934-A, SECOND EDITION, MAY 2008.
3Carlos Bruno Eckstein, PETROBRAS PLANTS CONCEPTION AND THEIR MATERIAL REQUIREMENTS, DSe. DILLINGER PRESSURE VESSEL COLLOQUIUM - 2009.
4THE USE OF VANADIUM MODIFIED CHROME MOLYBDENUM STEEL PLATES IN PRESSURE VESSEL FABRICATION, Dillinger prossure vessel symposium 2009.
5Volker Gross,The welding of 21/4CrlMoV A Challenge, Bohler Schweisstechnik Deutschland GmbH.
7Cedric Chauvy, PREVENTION OF WELD METAL REHEAT CRACKING DURING CR-MO-V HEAVYREACTORS FABRICATION, PVP2009-78144.
8Toshihiko Shinya and Yoshiyuki Tomita,Effect of Calcium Treatments and Strain Rate on Reheat Cracking of Vanadium-Modified 2.25Cr-lMo Steel, MATERIALS CHARACTERIZATION 40:221-225 (1998).
9J.E. Indacochea and G.S,Kim Reheat Cracking Studies an Simulated Heat-Affected Zones of CrMoV Turbine Rotor Steels.
10Les Antalffy,REHEAT CRACKING IN HEAVY WALL 2.25Cr-lMo-V REACTOR WELDS AND THE DEVELOPMENT OF ULTRASONIC TECHNIQUES FOR THEIR DISCOVERY, Fluor Enterprises, Inc. Proceedings of 12th International Conference on Pressure Vessel Technology Jeju, Korea, September 20-23, 2009.