摘要
研究了硫酸镍、次磷酸钠、乳酸和稳定剂等对钢铁表面镀层沉积速率的影响,并对镀层的结合强度以及耐蚀性等方面进行了考察,确定了合适的工艺条件。根据该工艺制备的Ni-P镀层具有良好的表面质量和较高的结合强度,提高了耐蚀性。
The effects of nickel sulfate, sodium hypophosphite, lactic acid, stabilizer, etc. on the deposition velocity of Ni-P plating on iron and steel surface were studied. The adhesion and corrosion resistance of Ni-P films on iron and steel surface were alao investigated. Based on these, a suitable process was decided. The Ni-P coating obtained according to the above process exhibits a good surface quality,good adhesion and corrosion resistance.
出处
《电镀与环保》
CAS
CSCD
北大核心
2012年第1期29-31,共3页
Electroplating & Pollution Control
基金
兰州理工大学硕士基金(NO.SB05200409)资助
关键词
化学镀
稳定剂
沉积速率
耐蚀性
electroless plating
stabilizer
deposition rate
corrosion resistance
