期刊文献+

聚乳酸/醋酸淀粉/有机蒙脱土纳米复合材料性能的研究 被引量:2

Study on Properties of Poly(lactic acid)/Acetic Starch/OMMT Nano-composites
下载PDF
导出
摘要 采用熔融插层法制备了聚乳酸/醋酸淀粉/有机蒙脱土(PLA/AS/OMMT)纳米复合材料,利用差示扫描量热仪、动态流变仪和扫描电子显微镜分析了OMMT对纳米复合材料热性能、流变行为和相形态的影响。结果表明,加入OMMT降低了纳米复合材料的玻璃化转变温度和结晶温度;位于相界面的OMMT增强了PLA和AS两相间的相互作用并降低了界面张力,使分散相AS颗粒的尺寸减小、尺寸分布变窄,有效抑制了AS的聚集。 The nano-composites of poly(lactic acid)/acetic starch/ organic montmoriIlonite (PLA/ AS/OMMT) were prepared via extrusion melt intercalation. Thermal properties, rheological behavior and phase morphology of the nano-composites were analyzed using scanning calorimetry, dynamic rheometer, and scanning electron microscopy. It showed that OMMT increased the interaction between PLA and AS, inhibited the aggregation of AS, caused the decrease of particle size of AS. However, OMMT decreased Tg and Tc of the nano-composites.
出处 《中国塑料》 CAS CSCD 北大核心 2012年第1期41-45,共5页 China Plastics
关键词 聚乳酸 醋酸淀粉 有机蒙脱土 热性能 相形态 流变性能 纳米复合材料 poly(lactic acid) acetic starch organic modified montmorillonite thermal property phase morphology rheological behavior nano-composite
  • 相关文献

参考文献23

  • 1阿小维,黄强.淀粉基生物降解材料[M].北京:中国轻工业出版社,2008:1-6.
  • 2Simmons S, Thomas E L. Structural Characteristics of Biodegradable Thermoplastic Starch/Poly ( ethylene-vinyl alcohol) Blends [J]. Journal of Applied Polymer Science, 1995158, 2259-2285.
  • 3Bhattacharya M. Stress Relaxation of Starch/Synthetic Polymer Blends [J]. Journal of Materials Science, 1998, 33(16) :4331-4339.
  • 4Wang H, Sun X, Seib P. Mechanical Properties of Poly (lactic acid) and Wheat Starch Blends with Methylene-diphenyl Diisocyanate [J]. Journal of Applied Polymer Science, 2002, 84(6):1257-1262.
  • 5Chen L, Qiu X, Xie Z, et al. Poly (1-lactide)/Starch Blends Compatibilized with Poly (1-lactide)-g-Starch Copolymer [J]. Carbohydrate Polymers, 2006, 65(1) :75- 80.
  • 6Huneault M A, Li H B. Morphology and Properties of Compatihilized Polylactide/Thermoplastie Starch Blends [J]. Polymer, 2007, 48(1):270-280.
  • 7Wang H, Sun X, Seib P. Strengthening Blends of Poly (lactic acid) and Starch with Methylene-diphenyl Diisocyahate [J]. Journal of Applied Polymer Science, 2001, 82 (7):1761-1767.
  • 8Wu C. Improving Polylactide/Starch Biocomposites by Grafting Polylactide with Acrylic Acidcharacterization and Biodegradability Assessment [ J ]. Macromolecular Bioscience, 2005, 5(4):352-361.
  • 9Carlson D, Dubois P, Nie L, et al. Free Radical Branching of Polylactide by Reactive Extrusion [J]. Polymer Engi neering and Science, 1998, 38(2):311-321.
  • 10Carlson D, Nie L, Naravan R, et al. Maleation of Polylactide(PLA) by Reactive Extrusion [J]. Journal of Applied Polymer Science, 1999, 72(4):477-485.

二级参考文献20

  • 1林丽菁,童张法,赵奕玲,廖丹葵,张友全.高取代度淀粉磷酸酯的理化性质及结构表征[J].化学研究与应用,2006,18(1):44-48. 被引量:11
  • 2张水洞,张玉荣,汪秀丽,王玉忠.用于制备热塑性塑料的双醛玉米淀粉的研究[J].四川大学学报(自然科学版),2007,44(3):649-652. 被引量:18
  • 3Garlotta D, Doane W, Shogren R. Mechanical and thermal properties of starch-filled poly (D,L-lactic acid) /poly(hydroxy ester ether) biodegradable blends [J]. Journal of Applied Polymer Science, 2003, 88: 1775-1786.
  • 4Chang L J, Reactive blending of biodegradable polymers: PLA and starch [J]. Journal of Polymers and the Environment, 2000, 8(1): 33-37.
  • 5Pan H D, Sun X Z, Effects of moisture content and extrusion parameters on tensile strength of starch and poly (lactic acid) blends [J]. Applied Engineering in Agriculture. 2003, 19(5): 573-579.
  • 6Fringant C, Desbrieres J, Rinaudo M, Physical properties of acetylated starch-based materials relation with their molecular characteristics. Polymer, 1996, 37(13): 2 663-2 673.
  • 7Martin O, Averous L, Poty (lactic acid) : plasticization and properties of biodegradable multiphase systems [J]. Polymer, 2001, 42(14) 6 209-6 219.
  • 8Park J W, Im S S, Kim S H, Biodegradable polymer blends ofpoly (L-lactic acid) and gelatinized starch [J]. Polymer Engineering and Science, 2000, 40(12): 2 539-2 550.
  • 9Denise C, Li N, Ramani N, Maleation of polylactide by reactive extrusion [J]. Journal of Applied Polymer Science, 1999, 72(4): 477-485.
  • 10Van D B M C, Van D W M E, Janssen L P B M, The influence of plasticizer on extruded thermoplastic starch [J]. Journal of vinyl & additive technology. 1996, 2(2):170-174.

共引文献7

同被引文献26

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部