摘要
利用Reissner中厚板理论边界元、Mindlin中厚板理论有限元和三维弹性力学有限元分析了各种厚跨比的板的位移和应力,以确定利用三维理论、中厚板理论和薄板理论分析板时厚跨比的适用范围以及精确程度,为分析板时选择采用薄板理论、中厚板理论还是三维理论提供理论依据;同时也验证了采用缩减积分的Mindlin中厚板理论有限元法缓解了剪切锁死现象.
The displacements and stresses for various thickness-to-span ratios were obtained using the boundary element method （BEM） for Reissner＇s moderately thick plates, and the finite element method （FEM） for Mindlin＇s moderately thick plates and three dimensional problems. The applicable range and accuracy among the three dimensional theories, the moderately thick plate theory and thin plate theory were defined. A theory basis and reference for choosing the thin plate theory, the thick plate theory or the three dimensional theory to analyze plates were provided. The results have shown that shear locking is deleted when the reduced integration is used in the finite element of plates and shells.
出处
《湖南大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2012年第1期37-41,共5页
Journal of Hunan University:Natural Sciences
基金
国家自然科学基金资助项目(10972075)
国家973计划资助项目(2010CB3228005)
高等学校博士学科点专项科研基金资助项目(20090161110012)
汽车先进设计和制造技术国家重点实验室建设基金资助项目(60870003)
关键词
边界元法
有限元法
中厚板
薄板
厚跨比
boundary element method
finite element method
moderately thick plate
thin plate
thickness-to-span ratio
