期刊文献+

活塞环用合金球墨铸铁的试制 被引量:3

Trial-producing of Ductile Iron for Piston Ring
下载PDF
导出
摘要 利用Q10生铁开发活塞环用钼、铜、铬合金珠光体球墨铸铁,对其化学成分设计、熔炼工艺、球化、孕育处理进行试验和探究,通过加入质量分数0.1%Mo,0.5%Cu,0.5%Cr,以及适量的增碳剂,使球墨铸铁在铸态下达到了基体组织为85%以上的珠光体,硬度105 HRB,抗弯强度1200 MPa,符合活塞环的组织和性能要求。
出处 《热加工工艺》 CSCD 北大核心 2012年第1期180-181,共2页 Hot Working Technology
  • 相关文献

参考文献3

二级参考文献10

  • 1王继明.稀土、铜、硅对高硅耐酸铸铁铁耐酸性和机械性能的影响[J].铸造技术,1989(3):8-10. 被引量:4
  • 2周道光,金建平,郭大展,陆文华.Mn-Cu及Mn-Cr合金化对铸态球墨铸铁组织及性能的影响[J].铸造技术,1995,20(2):41-43. 被引量:1
  • 3程巨强,李少春.影响薄壁球墨铸铁白口倾向和球墨数量的因素分析[J].铸造技术,2007,28(3):323-325. 被引量:8
  • 4Misaka Yoshitaka, Kawasaki Kazuhiro. Komotori Jun. Fatigue strength of ferritic ductile cast iron hardened by super rapid induction heating and quenching [J].Materials Transactions,2004,45: 2930-2935.
  • 5Sunada Hisakichi, Fukaura Kenzo. Relationship between microstructure and impact strength offerritic ductile cast iron for cask use [J].Journal of the Society of Materials Science,1996, (45): 316-320.
  • 6Bosnjak B, Radulovic B, Pop-Tonev K. Influence of micro-alloying and heat treatment on the kinetics of bainitic reaction in austempered ductile iron [J].Journal of Materials Engineering and Performance,2001,( 10):203 -211.
  • 7RefaeyA, FatahallaN. Effect ofmicrostructure on properties of ADI and low alloyed ductile iron [J].Journal of Materials Science,2003, (38):351-362.
  • 8Li Zhenhua, Li Yanxiang. Effect of Sb on the graphite morphology and mechanical properties in heavy section ductile iron [J].Materials Science Forum, 2005,(5):2769-2772.
  • 9李隆盛.铸造合金及熔炼[M].北京:机械工业出版社,1989..
  • 10朱能山,孙元状,鹿志刚,谢金波,邱泽义,王桂明.铸态QT400-18铁素体球铁的生产应用[J].铸造,2000,49(1):41-42. 被引量:9

共引文献26

同被引文献15

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部