摘要
利用ABAQUS有限元分析软件,对不同结构参数下PBGA焊点的随机振动响应进行了分析。结果表明:在随机振动载荷作用下,PBGA封装焊点的最大应力位于焊点阵列的拐角处,而且在靠近PCB板的一侧;焊点的最大应力值与焊点高度成正比,与焊点直径和焊点间距成反比;当焊点直径为0.66 mm、高度为0.6 mm、间距为1.27 mm时,焊点的最大应力达到最大值842.4 MPa。
The random vibration responses of PBGA solder joints with different structure parameters were analyzed using ABAQUS software. The results indicate that, under the random vibration loading, the maximum stress of PBGA solder joints occurs at the corners of solder joint grid and at the points close to the PCB. The maximum stress of the solder joints is directly proportional to the joint height while inversely proportional to the joint diameter and the distance among the joints. The maximum stress of the solder joints reaches its largest value of 842.4 MPa when the diameter and height of the solder joint and the distance among the solder joints are 0.66 mm, 0.6 mm and 1.27 mm respectively.
出处
《电子元件与材料》
CAS
CSCD
北大核心
2012年第2期44-46,50,共4页
Electronic Components And Materials
基金
航空科学基金资助项目(No.20090247001)
关键词
电子封装
焊点
随机振动
PBGA
electronic package
solder joint
random vibration
PBGA