期刊文献+

PEMFC双极板的材料及制备工艺综述 被引量:6

Materials and preparation of bipolar plates in PEMFC
下载PDF
导出
摘要 质子交换膜燃料电池(PEFMC)具有高效、环保等优点,是未来重要的新型能源。作为PEMFC的关键组件同时又是制约PEMFC发展的重要因素,价格低廉、性能优良的双极板研究和开发对于PEMFC的发展有着至关重要的作用。综合阐述了目前几类用于制备PEMFC双极板的材料及其制备工艺,对其利弊做出了分析,并讨论了双极板材料的未来发展方向。 Proton exchange membrane fuel cell(PEMFC),with advantages such as high efficiency and environmental protection,is regarded as an important new energy in the future.The research and development of bipolar plate with lower cost and excellent property are very important for PEMFC because bipolar plates are not only one of the key components of PEMFC,but also one of the factors that restrict the development of PEMFC.In this article,both advantages and disadvantages of bipolar plate materials at present were compared and analyzed.The direction of the future bipolar plates development was also discussed.
出处 《电源技术》 CAS CSCD 北大核心 2012年第1期136-138,145,共4页 Chinese Journal of Power Sources
基金 国家"863"计划(2007AA03Z22)
关键词 质子交换膜 燃料电池 双极板 proton exchange membrane fuel cell bipolar plate
  • 相关文献

参考文献22

  • 1JAMESL,ANDREWD.燃料电池系统[M].朱红,译.北京:科学出版社,2005:10-20.
  • 2MEHTA V, COOPER J S.Review and analysis of PEM fuel cell design and manufacturing [J].Joumal of Power Sources,2003,114 ( 1 ): 32-53.
  • 3MIDDELMAN E, KOUT W, VOGELAAR B, et al. Bipolar plates for PEM fuel cells[J]. J Power Sources, 2003, 118:44-46.
  • 4HERMANN A, CHAUDHURI T, SPAGNOL P. Bipolar plates for PEM fuel cells:A review[J].Int J Hydrogen Energy,2005,30:1297- 1302.
  • 5BESMANN M T ,KLETT W J ,HENRY J J .Carbon/carbon composite bipolar plate for proton exchange membrane fuel cells [J].J Electrochemical Society,2000,147(11):4083-4086.
  • 6PARK B Y, MADOU M J. Design, fabrication, and initial testing of a miniature PEM fuel cell with micro-scale pyrolyzed carbon fluidic plates[J]. J Power Sources, 2006, 162:369-379.
  • 7WIND J,SPAH R, KAISER W,et ai. Metallic bipolar for PEM fuel cells[J].Joumal of Power ources,2002,105:256-260.
  • 8JOSEPH S, MCCLURE J C, CHIANELLI R, et al. Conducting polymer-coated stainless steel bipolar plates for proron exchange membrane fuel CelIs(PEMFC)[J]. Int J Hydrogen Energy, 2005, 30:1339-1344.
  • 9JOSEPH S, MCCLURE J C, SEBASTIAN P J, et al. Polyaniline and polypyrrole coatings on aluminum for PEM fuel cell bipolar plates[J]. J Power Sources, 2008, 177:161-166.
  • 10SHOW Y. Electrically conductive amorphous carbon coating on metal bipolar plates for PEFC[J]. J Surface & Coatings Technology, 2007, 202:1252-1255.

二级参考文献13

  • 1MEHTA V,COOPER J S.Review and analysis of PEM fuel cell design and manufacturing[J].Journal of Power Sources,2003,114:32-53.
  • 2杨国华.炭素材料(下册)[M].北京:中国物资出版社,1999.110-112.
  • 3HEINZEL A,MAHLENDORF F,NIEMZIG O,et al.Injection moulded low cost bipolar plates for PEM fuel cells[J].Journal of Power Souces,2004,3:35-40.
  • 4BESMANN T M,KLETT J W,HENRY J J,et al.Carbon/Carbon composite bipolar plate for PEM fuel cells[J].Journal of The Electrochemical Society,2000,147(11):4 083-4 086.
  • 5Chalk S G, Miller J F, Fred W J. Challenges for fuel cells in transport applications[J]. Power Source, 2000, 86: 40-51.
  • 6Brosius D. Composites energize full cells[J]. Composite Technology, 2001, 7: 40-42.
  • 7Brosius D. New materials introduced for growing automotive full cell market[J]. Composite Technology, 2000, 6: 10.
  • 8BUTLER Kurt. Highly conductive molding compounds and fuel cell bipolar plates comprising these compounds[P]. WO Patent: WO 00/57 506, 2000.
  • 9Scholta J, Rohland B, Trapp V. Investigation on novel low-cost graphite composite bipolar plates[J]. J Power Source, 1999, 84: 231-234.
  • 10WILSON Mahlon S, BUSICH Deanna. Composite bipolar plate for electrochemical cells[P]. WO Patent: WO 00/25 372, 2000.

共引文献32

同被引文献43

引证文献6

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部