摘要
采用IC厌氧反应器-改良型氧化沟-浅层气浮工艺处理制浆造纸废水,介绍和分析了整个工艺的主要构筑物及其调试运行方法。当进水CODCr为4000 mg/L、BOD5为1350 mg/L、SS为2000mg/L时,出水CODCr≤60 mg/L、BOD5≤20 mg/L、SS≤30 mg/L,达到GB3544—2008造纸工业水污染物排放标准的污染物排放限值。
Pulping and papering wastewater was treated by using IC anaerobic reactor-modified oxidation ditch-shallow air-floatation system, the main construction and commissioning method of the whole system were introduced and analyzed. When the influent CODCr was 4000 mg/L, BOD5 1350 mg/L, SS 2000 mg/L, the effluent CODCr ≤60 mg/L, BOD5 ≤20 mg/L, SS≤30 mg/L, which are meet the emission limits of "the paper industry water pollution discharge standard" ( GB354d-2008 ).
出处
《中国造纸》
CAS
北大核心
2012年第1期37-41,共5页
China Pulp & Paper
基金
陕西科技大学研究生创新基金资助
关键词
IC厌氧反应器
改良型氧化沟
浅层气浮
制浆造纸废水
调试
IC anaerobic reactor
modified oxidation ditch
shallow air-floatation
pulping and papermaking wastewater
trial