期刊文献+

Superplasticity of Ti2448 Alloy with Nanostructured Grains 被引量:3

Superplasticity of Ti2448 Alloy with Nanostructured Grains
原文传递
导出
摘要 Ti-24Nb-4Zr-8Sn, abbreviated as Ti2448 from its chemical composition in weight percent, is a multifunctional /3 type titanium alloy with body centered cubic (bcc) crystal structure, and its highly localized plastic deformation behavior contributes significantly to grain refinement during conventional cold processing. In the paper, the nanostructured (NS) alloy with grain size less than 50 nm produced by cold rolling has been used to investigate its superplastic deformation behavior by uniaxial tensile tests at initial strain rates of 1.5 ×10-2, 1.5×10^-3 and 1.6×10-4 s-1 and temperatures of 600,650 and 700℃. The results show that, in comparison with the coarse-grained alloy with size of 50 μm, the NS alloy has better superplasticity with elongation up to ~275% and ultimate strength of 50-100 MPa. Strain rate sensitivity (m) of the NS alloy is 0.21, 0.30 and 0.29 for 600,650 and 700℃, respectively. These results demonstrate that grain refinement is a valid way to enhance the superplasticity of Ti2448 alloy. Ti-24Nb-4Zr-8Sn, abbreviated as Ti2448 from its chemical composition in weight percent, is a multifunctional /3 type titanium alloy with body centered cubic (bcc) crystal structure, and its highly localized plastic deformation behavior contributes significantly to grain refinement during conventional cold processing. In the paper, the nanostructured (NS) alloy with grain size less than 50 nm produced by cold rolling has been used to investigate its superplastic deformation behavior by uniaxial tensile tests at initial strain rates of 1.5 ×10-2, 1.5×10^-3 and 1.6×10-4 s-1 and temperatures of 600,650 and 700℃. The results show that, in comparison with the coarse-grained alloy with size of 50 μm, the NS alloy has better superplasticity with elongation up to ~275% and ultimate strength of 50-100 MPa. Strain rate sensitivity (m) of the NS alloy is 0.21, 0.30 and 0.29 for 600,650 and 700℃, respectively. These results demonstrate that grain refinement is a valid way to enhance the superplasticity of Ti2448 alloy.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2011年第12期1099-1104,共6页 材料科学技术(英文版)
基金 supported by the National Natural Science Foundation of China (Nos. 51071152and 50901080) the National High Technology Research and Development Program of China (No.2011AA030106)
关键词 Titanium alloy bcc crystal SUPERPLASTICITY Nanostructured grain Titanium alloy bcc crystal Superplasticity Nanostructured grain
  • 相关文献

参考文献37

  • 1F. Li, D.H. Bae and A.K. Ghosh: Acta Mater., 1997, 45, 3887.
  • 2D.H. Bae and A.K. Ghost: Acta Mater., 2000, 48, 1207.
  • 3M. Eddahbi, T.R. McNelley and O.A. Ruano: Metall. Mater. Trans. A, 2001, 32, 1093.
  • 4Z.Y. Ma, R.S. Mishra and M.W. Mahoney: Acta Mater., 2002, 50, 4419.
  • 5M.A. Kulas, W.P. Green, E.M. Talefe, P.E. Krajewski and T.R. McNelley: Metall. Mater. Trans. A, 2005, 36, 1249.
  • 6K. Tsuzaki, X.X. Huang and T. Maki: Acta Mater., 1996, 44, 4491.
  • 7H. Miyamoto, T. Mimaki and S. Hashimoto: Mater. Sci. Eng. A, 2001, 319–321, 779.
  • 8H. Zhang, L. Zhang, X. Cheng, L. Xu and B. Bai: Scripta Mater., 2010, 62, 798.
  • 9X.J. Zhu, M.J. Tan and W. Zhou: Scripta Mater., 2005, 52, 651.
  • 10J.S. Kim, J.H. Kim, Y.T. Lee, C.G. Park and C.S. Lee: Mater. Sci. Eng. A, 1999, 263, 272.

同被引文献6

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部