摘要
The operational frequency range of RF system at HIRFL-CSRe (cooling storage experimental ring) is 0.5-2 MHz, and it works in fundamental and second harmonic. It includes five sections: ferrite ring loaded RF cavity, RF generator, low-level system, computer system and cavity cooling. The cavity is based on the coaxial resonator type which is short at the terminal with one gap and loaded with domestic ferrite rings. The RF generator is designed in a push-pull mode. The low-level control system is based on PID, DSP, FPGA and DDS9854+USB interface and has three feedback loops. This RF system is designed independently and manufactured domestically. For the first time, it realized the pulse modulation, variable harmonic and CW operational modes. The maximum output power is up to 70 kW and the 10 kV RF voltage is used to capture the irradiative beam and decelerate the beam from 400 to 30 MeV/u.
The operational frequency range of RF system at HIRFL-CSRe （cooling storage experimental ring） is 0.5-2 MHz, and it works in fundamental and second harmonic. It includes five sections： ferrite ring loaded RF cavity, RF generator, low-level system, computer system and cavity cooling. The cavity is based on the coaxial resonator type which is short at the terminal with one gap and loaded with domestic ferrite rings. The RF generator is designed in a push-pull mode. The low-level control system is based on PID, DSP, FPGA and DDS9854＋USB interface and has three feedback loops. This RF system is designed inde- pendently and manufactured domestically. For the first time, it realized the pulse modulation, variable harmonic and CW oper- ational modes. The maximum output power is up to 70 kW and the 10 kV RF voltage is used to capture the irradiative beam and decelerate the beam from 400 to 30 MeV/u.
