Improving the CoLM in Taklimakan Desert Hinterland with Accurate Key Parameters and an Appropriate Parameterization Scheme

Improving and validating land surface models based on integrated observations in deserts is one of the challenges in land modeling. Particularly, key parameters and parameterization schemes in desert regions need to be evaluated in-situ to improve the models. In this study, we calibrated the land-surface key parameters and evaluated several formulations or schemes for thermal roughness length （z 0h ） in the common land model （CoLM）. Our parameter calibration and scheme evaluation were based on the observed data during a torrid summer （29 July to 11 September 2009） over the Taklimakan Desert hinterland. First, the importance of the key parameters in the experiment was evaluated based on their physics principles and the significance of these key parameters were further validated using sensitivity test. Second, difference schemes （or physics-based formulas） of z 0h were adopted to simulate the variations of energy-related variables （e.g., sensible heat flux and surface skin temperature） and the simulated variations were then compared with the observed data. Third, the z 0h scheme that performed best （i.e., Y07） was then selected to replace the defaulted one （i.e., Z98）; the revised scheme and the superiority of Y07 over Z98 was further demonstrated by comparing the simulated results with the observed data. Admittedly, the revised model did a relatively poor job of simulating the diurnal variations of surface soil heat flux, and nighttime soil temperature was also underestimated, calling for further improvement of the model for desert regions.