期刊文献+

Effects of Chemical Reaction Caused by Cooling Stream on Film Cooling Effectiveness 被引量:1

Effects of Chemical Reaction Caused by Cooling Stream on Film Cooling Effectiveness
原文传递
导出
摘要 With the increase of inlet temperature of gas turbines, the benefits by using the conventional methods are likely to approach their limits. Therefore, it is essential to study novel film cooling methods for surpassing these current limits. Based on the theory of heat transfer enhancement, a film cooling method with chemical reaction by cool- ing stream is proposed. In order to test the feasibility of the proposed method, numerical simulations have been conducted. The classic flat plate structure with a 30 degree hole is used for the simulation. In the present study, the effects of the parameters in relation to the chemical reaction on film cooling effectiveness, such as chemical heat sink, volume changes, and reaction rate, are investigated numerically. The conventional film cooling is also calculated for the comparison. The results show that film cooling effectiveness is improved obviously due to the chemical reaction, and the reaction heat and reaction rate of cooling stream have an important effect on film ef- fectiveness. However, the effect of volume changes can be ignored.
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2012年第1期60-65,共6页 热科学学报(英文版)
基金 supported by the National Natural Science Foundation of China (Grant No.50976118) the National Basic Research Program of China (973 Program) Grant No.G2010CB227302
关键词 Gas turbine Film cooling Chemical reaction Heat transfer Numerical simulation 气膜冷却效率 化学反应膜 数值模拟 传统方法 冷却方法 燃气涡轮机 入口温度 电流限制
  • 相关文献

参考文献16

  • 1D. M. Kercher, A Film-cooling CFD Bibliography: 1971-1996, International Journal of Rotating Machinery,1998, 4 (1) 61 72.
  • 2R. S. Bunker, A Review of Shaped Hole Turbine Filmcooling Technology, Journal of Heat Transfer, 2005, 127 (4) 441 454.
  • 3J. D. Heidmann, S. Ekkad, A Novel Anti-vortex Turbine Film-cooling Hole Concept, ASME, 2007, Montreal, Canada, GT-27528.
  • 4A. Dhungel, Y. P. Lu, W. Phillips et al., Film-cooling from a Row of Holes Supplemented with Anti-vortex Holes, ASME, 2007, Montreal, Canada, GT-27419.
  • 5J. D. Heidmann, A Numerical Study of Anti-vortex Film-cooling Designs at High Blowing Ratio, ASME, 2008, Berlin, Germany, GT-50845.
  • 6M. J. Ely, B. A. Jubran, A Parametric Study on the Effect of Sister Hole Location on Active Film-cooling, Flow Control, ASME, 2010, Glasgow, UK, GT-22060.
  • 7L. Graf, L. Kleiser, Large-Eddy Simulation of Doublerow Compound-angle Film Cooling: Setup and Validation, Computers & Fluids, 2011, 43 (1) 58 67.
  • 8S. Na, T. I. Shih, Increasing Adiabatic Film-cooling Effectiveness by Using an Upstream Ramp, Journal of Heat Transfer, 2007, 129 (4) 464 471.
  • 9H. Nasir, S. Acharya, S. V. Ekkad, Improved Film Cooling from Cylindrical Angled Holes with Triangular Tabs: Effect of Tab Orientations, International Journal of Heat and Fluid Flow, 2003, 24 (5) 657 668.
  • 10M. G. Ghorab, Film Cooling Effectiveness and Net Heat Flux Reduction of Advanced Cooling Schemes Using Thermochromic Liquid Crystal, Applied Thermal Engineering, 2011, 31 (1) 77 92.

同被引文献1

  • 1Z.Y. Guo,D.Y. Li,B.X. Wang.A novel concept for convective heat transfer enhancement[J].International Journal of Heat and Mass Transfer.1998(14)

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部