摘要
A novel synergetic arc control method was used to control twin-electrode alternating current （ AC） to direct current （DC） pulsed arc welding and the mechanism of poor sidewall fusion in narrow gap welding was investigated. The synergetic arc control method easured that the arc voltage of DC welding source could switch in phase with the AC welding source. To test the reliability and operability of this method, a twin-electrode AC to DC pulsed arc welding system was set up and data was acquired through high-speed photography and electrical signal measurement system. The results show that the interactions between the two arcs can be controlled effectively and the control method is a sensitive and efficient control method.
A novel synergetic arc control method was used to control twin-electrode alternating current （ AC） to direct current （DC） pulsed arc welding and the mechanism of poor sidewall fusion in narrow gap welding was investigated. The synergetic arc control method easured that the arc voltage of DC welding source could switch in phase with the AC welding source. To test the reliability and operability of this method, a twin-electrode AC to DC pulsed arc welding system was set up and data was acquired through high-speed photography and electrical signal measurement system. The results show that the interactions between the two arcs can be controlled effectively and the control method is a sensitive and efficient control method.
基金
Supported by National Natural Science Foundation of China （Grant No. 51175374）, the Application of Basic ＆ Frontier Technology Program of Tianjin （Grant No. 09JCYBJC05000） and the Science ＆ Technology Pillar Program of Tianjin（ Grant No. 10ZCKFSF00200）.
