期刊文献+

一种带瞬态增强电路的无电容型LDO 被引量:2

A Capacitorless LDO with Transient Response Enhancement
下载PDF
导出
摘要 设计了一种可用于SOC片内供电的新型瞬态增强无电容型线性压差调整器电路。相对于需要由误差放大器、缓冲器和反馈网络三级结构构成的传统LDO,该设计在简单的一级单管控制结构上增加了摆率增强电路(SRE)来实现瞬态响应增强,可以更容易地进行频率补偿,在简化设计过程的同时,保证了较快的响应速度。 A novel capacitorless LDO with excellent performance on transient response was presented for on-chip power supply of SOC.Compared to conventional 3-stage LDO consisting of an error amplifier,a buffer and a feedback network,the novel LDO circuit was composed of only one stage,which was incorporated with a slew rate enhancement circuit to achieve improved transient response and make frequency compensation easier.With the new structure,a rapid response was ensured while the design process was simplified.
出处 《微电子学》 CAS CSCD 北大核心 2012年第1期54-57,62,共5页 Microelectronics
基金 国家"核高基"重大专项课题(2009ZX01031-003-003) 模拟集成电路重点实验室基金资助项目(9140C0903091004)
关键词 无电容型LDO 瞬态增强 摆率增强 Capacitorless LDO Transient response enhancement Slew rate enhancement
  • 相关文献

参考文献6

  • 1RINCON-MORA G A. Low--dropout voltage regulator incorporating a current efficient transient response boost circuit [P]. US Patent: US6046577, 2000. 9.
  • 2BROOKE D, PLANKENSTEINER M. Integration of power and audio systems [J]. Communications Engineer, 2003, 1(4): 32-35.
  • 3MILLIKEN R J, SILVA-MARTINEZ J, SA.NCHEZ- SINENCIO E. Full on-chip CMOS low-dropout voltage regulator [J]. IEEE Trans Circ Syst - I: Reg Pap, 2007, 54(9): 1879- 1890.
  • 4SANSENWMC模拟集成电路设计精粹[M].北京:清华大学出版社,2008:200—206.
  • 5MAN T Y, MOK P K T, CHAN M S. A high slew- rate push-pull output amplifier for low-quiescent current low-dropout regulators with transient response improvement [J]. IEEE Trans Circ Syst - Ⅱ: Express Briefs, 2007, 54(9): 755-759.
  • 6LEE H, MOK P K T, LEUNG K N. Design of low- power analog drivers based on slew-rate enhancement circuits for CMOS low-dropout regulators [J]. IEEE Trans Circ Syst - Ⅱ: Express Briefs, 2005, 52 ( 9 ) : 563-567.

同被引文献12

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部