期刊文献+

Microstructure and Mechanical Properties of Calcium Phosphate Cement/Gelatine Composite Scaffold with Oriented Pore Structure for Bone Tissue Engineering

Microstructure and Mechanical Properties of Calcium Phosphate Cement/Gelatine Composite Scaffold with Oriented Pore Structure for Bone Tissue Engineering
下载PDF
导出
摘要 The macroporous calcium phosphate(CPC) cement with oriented pore structure was prepared by freeze casting. SEM observation showed that the macropores in the porous calcium phosphate cement were interconnected aligned along the ice growth direction. The porosity of the as-prepared porous CPC was measured to be 87.6% by Archimede's principle. XRD patterns of specimens showed that poorly crystallized hydroxyapatite was the main phase present in the hydrated porous calcium phosphate cement. To improve the mechanical properties of the CPC scaffold, the 15% gelatine solution was infiltrated into the pores under vacuum and then the samples were freeze dried to form the CPC/gelatine composite scaffolds. After reinforced with gelatine, the compressive strength of CPC/gelatine composite increased to 5.12 MPa, around fifty times greater than that of the unreinforced macroporous CPC scaffold, which was only 0.1 MPa. And the toughness of the scaffold has been greatly improved via the gelatine reinforcement with a much greater fracture strain. SEM examination of the specimens indicated good bonding between the cement and gelatine. Participating the external load by the deformable gelatine, patching the defects of the CPC pores wall, and crack deflection were supposed to be the reinforcement mechanisms. In conclusion, the calcium phosphate cement/gelatine composite with oriented rmre structure nrenared in this work might be a potential scaffold for bone tissue engineerinm The macroporous calcium phosphate(CPC) cement with oriented pore structure was prepared by freeze casting. SEM observation showed that the macropores in the porous calcium phosphate cement were interconnected aligned along the ice growth direction. The porosity of the as-prepared porous CPC was measured to be 87.6% by Archimede's principle. XRD patterns of specimens showed that poorly crystallized hydroxyapatite was the main phase present in the hydrated porous calcium phosphate cement. To improve the mechanical properties of the CPC scaffold, the 15% gelatine solution was infiltrated into the pores under vacuum and then the samples were freeze dried to form the CPC/gelatine composite scaffolds. After reinforced with gelatine, the compressive strength of CPC/gelatine composite increased to 5.12 MPa, around fifty times greater than that of the unreinforced macroporous CPC scaffold, which was only 0.1 MPa. And the toughness of the scaffold has been greatly improved via the gelatine reinforcement with a much greater fracture strain. SEM examination of the specimens indicated good bonding between the cement and gelatine. Participating the external load by the deformable gelatine, patching the defects of the CPC pores wall, and crack deflection were supposed to be the reinforcement mechanisms. In conclusion, the calcium phosphate cement/gelatine composite with oriented rmre structure nrenared in this work might be a potential scaffold for bone tissue engineerinm
作者 QI Xiaopeng HE Fupo YE Jiandong 漆小鹏;叶建东;YE Jiandong(School of Materials Science and Engineering,South China University of Technology;School of Material and Chemical Engineering,Jiangxi University of Science and Technology)
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2012年第1期92-95,共4页 武汉理工大学学报(材料科学英文版)
基金 the National Natural Science Foundation of China (Nos.50772037 and 50732003) the Science and Technology Program of Guangdong Province of China (No. 2008A030102008) the Research Foundation for Doctors of Jiangxi University of Science and Technology
关键词 calcium phosphate cement SCAFFOLD gelatine oriented pores mechanical properties calcium phosphate cement scaffold gelatine oriented pores mechanical properties
  • 相关文献

参考文献21

  • 1R Langer, J P Vacanti. Tissue Engineering[J]. Science, 1993, 260: 920-926.
  • 2M Sittinger, J Bujia, N Rotter, et al. Tissue Engineering and Autologous Transplant Formation: Practical Approaches with Resorbable Biomaterials and New Cell Culture Techniques[J]. Biomaterials, 1996, 17: 237-242.
  • 3K Rezwan, Q Z Chen, J J Blaker, et al. Biodegradable and Bioactive Porous Polymer/Inorganic Composite Scaffold for Bone Tissue Engineering[J]. Biomaterials, 2006, 27: 3 413-3 431.
  • 4C R Yang, Y J Wang, X F Chen, et al. Biomimetic Fabrication of BCP/COL/HCA Scaffolds for Bone Tissue Engineering[J]. Materials Letters, 2005, 59: 3 635-3 640.
  • 5J E Barraleta, L Grovera, T Gaunta, et al. Preparation of Macroporous Calcium Phosphate Cement Tissue Engineering Scaffold[J]. Biomaterials, 2002, 23: 3 063-3 072.
  • 6X H Wang, J B Ma, Y N Wang, et al. Bone Repair in Radii and Tibias of Rabbits with Phosphorylated Chitosan Reinforced Calcium Phosphate Cements[J]. Biomaterials, 2002, 23: 4 167-4 176.
  • 7E F Burguera, H H K Xu, S Takagi, et al. High Early Strength Calcium Phosphate Bone Cement: Effects of Dicalcium Phosphate Dihydrate and Absorbable Fibers[J]. J. Biomed. Mater. Res. Part A, 2005, 75A: 966-975.
  • 8A S Von Gonten, J R Kelly, J M Antonucci. Load-bearing Behavior of a Simulated Craniofacial Structure Fabricated From a HydroxyapatiteCement and Bioresorbable Fiber-mesh[J]. J. Mater. Sci.: Mater. Med., 2000, 11: 95-100.
  • 9H H K Xu, M D Weir, E F Burguera, et al. Injectable and Macroporous Calcium Phosphate Cement Scaffold[J]. Biomaterials, 2006, 27: 4 279-4 287.
  • 10H H K Xu, F C Eichmiller, A A Giuseppetti. Reinforcement of a Self- setting Calcium Phosphate Cement with Different Fibers[J]. J. Biomed. Mater. Res., 2000, 52: 107-114.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部