摘要
采用压力板仪详细研究了不同击实条件对非饱和重塑粉土土水特征曲线的影响,并采用van Genuchten模型对实测试样的土水特征曲线进行了拟合。分别取在初始击实含水率相同的条件下,击实干密度不同的试样以及在击实曲线上同一干密度处对应的不同初始击实含水率的试样,对其进行土水特征曲线测试。结果表明:击实干密度越大,空气进气值越高。击实含水率越大,试样可塑性越好,其空气进气值越大。
Pressure plate apparatus are used to study the influences of different compaction conditions on soil water characteristic curve of unsaturated remolded silt.van Genuchten model are employed to fit the soil water characteristic curve.We can get different dry densities when the compaction water content is the same in the initial conditions and different initial moisture contents corresponded to the same dry density in the compaction curve which are used to testing the soil water characteristic curves.The results show that the higher compaction dry densities,the higher air entry values are,and the higher compaction water content,the batter plasticity of the sample is and the higher air entry value is.
出处
《水文地质工程地质》
CAS
CSCD
北大核心
2012年第1期42-46,共5页
Hydrogeology & Engineering Geology
基金
国家自然科学基金(19872211)
岩土力学与工程国家重点实验室重点方向性项目(Q110601)
中国科学院"百人计划"择优项目资助
关键词
土水特征曲线
击实干密度
击实含水量
模型
soil-water characteristic curve
compaction dry density
compaction water content
model