期刊文献+

一种用于流延机伺服电机及减速器的选型方法 被引量:2

A Model Selection Method for Servo Motor and Reducer of Casting Machine
下载PDF
导出
摘要 针对流延机伺服电机及减速器传统选型方法的计算量大、适用性差等缺点,提出了基于连续运动的流延机伺服电机及减速器的新选型方法,该方法应用图形化方式判断备选电机和减速器的可行性,然后对可行性电机和减速器进行优化选取。实例对比说明,新型方法相比传统方法具有简单、直观、实践效果好等优点,可推广应用于所有连续运动的伺服电机及减速器选型。 A model selection method and new principle for servo motor and reducer of casting machine was put forward,which was based on continuous movement and on account of the shortcomings of traditional selection method,such as enormous computation and poor applicability.By using the graphic expression,the method manages to judge the feasibility of alternative motors and reducers expediently,and then makes optimization towards the rest of motors and reducers.Through comparison examples,it was concluded that new method,compared with the traditional method,has the merits of simple,intuitive,and good effect in practice.It can be widely applied in all servo motor and reducer selection of continuous motion.
出处 《包装工程》 CAS CSCD 北大核心 2012年第5期17-21,72,共6页 Packaging Engineering
基金 国家自然科学基金(50705014) 广东省教育部产学研结合项目(2010A090200017)
关键词 流延机 伺服电机 减速器 新方法 casting machine servo motor reducer
  • 相关文献

参考文献11

  • 1李基洪.机电一体化在包装机中的应用[J].包装工程,2000,21(6):38-39. 被引量:5
  • 2CAMPOLO D. Motor Selection Via Impedance-Matching for Driving Nonlinearly Damped, Resonant Loads [J]. Mechatronics, 2010(20) : 566 -- 573.
  • 3CHOI Chang hwan. A Motor Selection Technique for Designing a Manipulator[J]. International Conference on Control Automation and Systems, 2007,17--20(10):2487--2492.
  • 4CUSIMANO G. Choice of Electrical Motor and Transmission in Mechatronic Applications: The Torque Peak [J].Mechanism and Machine Theory,2011(46) :1207--1235.
  • 5Van de STRAETE H J,De SCHUTTER J,DEGEZELLE P, et al. Servo Motor Selection Criterion for Mechatronic Applications[J]. IEEE/ASME Transactions on Mechatronics,1998(3) :43--50.
  • 6张宝国,张起伟,叶阜,李波.轨行式斗轮堆取料机行走机构驱动功率的计算及电机选型[J].矿山机械,2009,37(1):49-53. 被引量:6
  • 7ILINSKI N F. A New Approach to Acmotor Selection and Checking[J]. Electrical Machines and Drives, 19 9 5 ( 9 ) : 11 -- 13.
  • 8CETINKUNT S. Optimal Design Issues in High-Speed High Precision Motion Servo Systems [J]. Mechatronics,1991(1) :187- 201.
  • 9Van de STRAETE H J, De SCHUTTER J, BELMANS R. An Efficient Procedure For Checking Performance Limits In Servo Drive Selection And Optimization [J]. IEEE/ASME Transactions on Mechatronics, 1999,4 ( 4 ) : 378--386.
  • 10ROOS F. Optimal Selection of Motor and Gearhead in Meehatronic Applications[J]. Mechatronics, 2006 ( 16 ) : 63--72.

二级参考文献4

  • 1Durst,W.Vogt,W.斗轮挖掘机[M].天津:天津科技翻译出版公司,1992.
  • 2Reinhard H. Wohlbier. Stacking Blending Reclaiming of Bulk Materials [M]. Switzerland. Trans Tech Publications, 1977.
  • 3邵明亮,于国飞,耿华,等.斗轮堆取料机[M].北京:化学工业出版社,2007.
  • 4张宝国,张起伟,黄曙光.基于Inventor的斗轮堆取料机的设计[J].工程机械,2007,38(11):32-36. 被引量:4

共引文献9

同被引文献13

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部