期刊文献+

Electrochemical study on preparation of Mg-Li-Yb alloys in LiCl-KCl-KF-MgCl_2-Yb_2O_3 melts 被引量:1

Electrochemical study on preparation of Mg-Li-Yb alloys in LiCl-KCl-KF-MgCl_2-Yb_2O_3 melts
原文传递
导出
摘要 This paper presented a novel study on electrochemical codeposition of Mg-Li-Yb alloys in LiCl-KCl-KF-MgCl2-Yb2O3 melts on molybdenum. The factors of the current efficiency were investigated. Electrolysis temperature had great influence on current efficiency; the highest current efficiency was obtained when electrolysis temperature was about 660 oC. The content of Li in Mg-Li-Yb alloys increased with the high current densities. The optimal electrolytic temperature and cathodic current density were around 660 oC and 9.3 A/cm2, respectively. The chemical content, phases, morphology of the alloys and the distribution of the elements were analyzed by X-ray diffraction, scanning electron microscopy, inductively coupled plasma mass spectrometry, respectively. The intermetallic of Mg-Yb was mainly distributed in the grain boundary of the alloys, presented as reticulated structures, and refined the grains. The lithium and ytterbium contents in Mg-Li-Yb al-loys could be controlled by changing the concentration of MgCl2 and Yb2O3 and the electrolysis conditions. This paper presented a novel study on electrochemical codeposition of Mg-Li-Yb alloys in LiCl-KCl-KF-MgCl2-Yb2O3 melts on molybdenum. The factors of the current efficiency were investigated. Electrolysis temperature had great influence on current efficiency; the highest current efficiency was obtained when electrolysis temperature was about 660 oC. The content of Li in Mg-Li-Yb alloys increased with the high current densities. The optimal electrolytic temperature and cathodic current density were around 660 oC and 9.3 A/cm2, respectively. The chemical content, phases, morphology of the alloys and the distribution of the elements were analyzed by X-ray diffraction, scanning electron microscopy, inductively coupled plasma mass spectrometry, respectively. The intermetallic of Mg-Yb was mainly distributed in the grain boundary of the alloys, presented as reticulated structures, and refined the grains. The lithium and ytterbium contents in Mg-Li-Yb al-loys could be controlled by changing the concentration of MgCl2 and Yb2O3 and the electrolysis conditions.
出处 《Journal of Rare Earths》 SCIE EI CAS CSCD 2012年第2期159-163,共5页 稀土学报(英文版)
基金 Project supported by the National Natural Science Foundation of China (21103033, 21101040 and 21173060) the Fundamental Research funds for the Central Universities (HEUCF101210002) 863 projects (2011AA03A409, 2009AA050702)
关键词 current efficiency electrochemical codeposition Mg-Li-Yb alloys INTERMETALLIC rare earths current efficiency electrochemical codeposition Mg-Li-Yb alloys intermetallic rare earths
  • 相关文献

参考文献18

  • 1Drozd Z,Trojanová Z,Kúdela S. Strengthening in Mg-Li matrix composites[J].Journal of Alloys and Compounds,2004,(1-2):192.doi:10.1016/j.jallcom.2004.01.040.
  • 2Elkin F M,Davydov V G. Russian ultralight constructionalMg-Li alloys.Their structure,properties,manufacturing,applications[A].2004.94.
  • 3Trojanova Z,Drozd Z,Lukac P. Deformation behaviour of Mg-Li alloys at elevated temperatures[J].Materials Science and Engineering,2005.410.
  • 4Chia T L,Easton M A,Zhu S M,Gibson M A Birbilis N Nie J F. The effect of alloy composition on the microstructure and tensile properties of binary Mg-rare earth alloys[J].Intermetallics,2009.481.doi:10.1016/j.intermet.2008.12.009.
  • 5Wang T,Zhang M L,Niu Z Y,Liu B. Influence of rare earth elements on microstructure and properties of Mg-Li alloys[J].Journal of Rare Earths,2006,(6):797.doi:10.1016/S1002-0721(07)60032-5.
  • 6Chen Z,Zhang M L,Han W. Electrodeposition of Li and electrochemical formation of Mg-Li alloys from the eutectic LiCl-KCl[J].Journal of Alloys and Compounds,2008,(1/2):174.doi:10.1016/j.jallcom.2007.10.019.
  • 7Iida T,Nohira T,Ito Y. Electrochemical formation of Sm-Co alloys by codeposition of Sm and Co in a molten LiCl-KCl-SmCl3-CoCl2 system[J].Electrochimica Acta,2003,(17):2517.doi:10.1016/S0013-4686(03)00293-7.
  • 8Iida T,Nohira T,Ito Y. Electrochemical formation of Yb-Ni alloy films by Li codeposition method in a molten LiCl-KCl-YbCl3 system[J].Electrochimica Acta,2003,(11):1531.doi:10.1016/S0013-4686(03)00031-8.
  • 9Iida T,Nohira T,Ito Y. Electrochemical formation of Sm-Nialloy films in a molten LiCl-KCl-SmCl3 system[J].Electrochimica Acta,2001,(16):2537.doi:10.1016/S0013-4686(01)00470-4.
  • 10Kuznetsov S A,Hayashi H,Minato K,Gaune-Escard M. Determination of uranium and rare-earth metals separation coefficients in LiCl-KCl melt by electrochemical transient techniques[J].Journal of Nuclear Materials,2005,(1/3):169.doi:10.1016/j.jnucmat.2005.04.037.

同被引文献37

引证文献1

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部