摘要
研究了锻造温度、锻造比等对新型高强铝锂合金成形质量的影响,总结了新型高强铝锂合金在不同锻造比下的组织性能变化规律。结果表明:锻造比为3)7时,合金热处理后径向抗拉强度均大于500 MPa,并且其径向抗拉强度明显高于轴向;并且随着锻造比的增大,晶粒尺寸也逐渐增大。
The mechanical properties and microstructure of a new high-strength Al-Li alloy is characterized as functions of the different forging ratio after the forging process.Results show that the radial stretch strength is more than 500 MPa,and the radial stretch strength is higher than the axial stretch strength.The grain size is increased with the increase of the forging ratio.
出处
《宇航材料工艺》
CAS
CSCD
北大核心
2012年第1期42-45,共4页
Aerospace Materials & Technology
关键词
铝锂合金
锻造
力学性能
组织
Al-Li alloy
Forging
Mechanical properties
Microstructure