摘要
本文采用塔菲尔极化曲线法和交流阻抗法,在常温条件下,研究了600镍基合金在硫酸盐溶液中的腐蚀电化学行为,并初步分析了其腐蚀电化学行为的机理。以及在300℃条件下,600镍基合金在硫酸盐溶液中的腐蚀行为。试验结果表明,硫酸根对600镍基合金有很强的腐蚀加快作为,浓度越大腐蚀加速的效应越明显,同时在高温条件下,600镍基合金出现了点蚀的腐蚀形态。
In this paper,the corrosion behaviors of Alloy 600 effected by the sodium sulfate were investigated by AC impedance technique and Tafel technique,and the machanism of electrochemical corrosion behavior of Alloy 600 was analysed roughly.At the same time,high temperature corrosion behaviors of Alloy 600 in sodium sulfate were studied in autoclave.The result shows that sodium sulfate could accelerate corrosion velocity of Alloy 600 obviously;And Allay 600 suffer pitting corrosion in the sodium sulfate solution at high temperature,and also the surface of Alloy 600 was covered by the oxides.
出处
《清洗世界》
CAS
2012年第2期15-19,共5页
Cleaning World
关键词
600镍基合金
电化学
高温腐蚀
Alloy 600
electrochemical behavior
high temperature corrosion