期刊文献+

数字控制矿用应急电源三相逆变器的设计 被引量:4

Design on Digital Controlled Three Phase Inverter of Mine Emergency Power
下载PDF
导出
摘要 为了提高矿用应急电源供电系统的可靠性,基于数字控制器高度集成控制电路、精确控制精度、稳定工作性能等优点,以TMS320F2812 DSP为核心,设计了数字控制的矿用应急电源三相逆变器,并进行实验分析。输出波形表明,无论是满载还是空载情况下,该数字控制逆变器均能保证较好的稳定性和供电质量。 In order to improve the reliability of the mine emergency power supply system, base on the high integrated control circuit, accurate controlled accuracy, stable working performances and other advantages of the digital controller, taking the TMS320F2812 DSP as the core, a mine emergent power three phase inverter with the digital control was designed and a lab analysis was conducted. The output waveform showed that the digital controlled inverter would ensure the good stability and the power supply quality, no matter when a full load or no load was.
出处 《煤炭工程》 北大核心 2012年第3期14-16,共3页 Coal Engineering
基金 安全生产重大事故防治关键技术重点科技项目(10-007) 河北省科技支撑计划项目(10215682) 河北省科技支撑计划项目(10213901D)
关键词 三相逆变器 应急电源(EPS) 数字控制 集成控制电路 three phase inverter emergency power sources (EPS) digital control intergrated control circuit
  • 相关文献

参考文献6

二级参考文献20

  • 1金舜,钟彦儒.一种新颖的同时考虑中点电位平衡和窄脉冲消除及死区补偿的三电平空间电压矢量脉宽调制方法(英文)[J].中国电机工程学报,2005,25(6):60-66. 被引量:36
  • 2B K Bose.Energy,Environment and Advances in Power Electronics[J].IEEE Trans.on Power Electronics,2000,15(6):688-701.
  • 3Fatu M,Tutelea L,Teodorescu R.Motion Sensorless Bidirectional PWM Converter Control with Seamless Switching From Power Grid to Stand Alone and Back PESC Record[A].IEEE 38th Annual Power Electronics Specialists Conference[C].Orlands,USA,2007:1239-1244.
  • 4Ben-Brahim L.On the compensation of dead time and zero-current crossing for a PWM-inverter-controlled AC servo drive[J].IEEE Trans on Industrial Electronics,2004,51(5):1113-1118.
  • 5Seung Gi Jeong,Min-Ho Park.The analysis and compensation of dead-time effects in PWM inverters[J].IEEE Trans on Industrial Electronics,1991,38(2):108-114.
  • 6Attaianese C,Tomasso G.Predictive compensation of dead-time effects in VSI feeding induction motors[J].IEEE Trans on Industry Applications,2001,37(3):856-863.
  • 7Urasaki N,Senjyu T,Uezato K,et al.On-line dead-time compensation method for permanent magnet synchronous motor drive[C].IEEE ICIT '02,Bangkok,Thailand,2002.268-273.
  • 8Jong-Woo Choi,Seung-Ki Sul.Inverter output voltage synthesis using novel dead time compensation[J].IEEE Trans on Power Electronics,1996,11(2):221-227.
  • 9Hyun-Soo Kim,Hyung-Tae Moon,Myung-Joong Youn.On-line dead-time compensation method using disturbance observer[J].IEEE Trans onPowerElectronics,2003,18(6):1336-1345.
  • 10Hyun-Soo Kim,Kyeong-Hwa Kim,Myung-Joong Youn.On-line dead-time compensation method based on time delay control[J].IEEE Trans on Control System,2003,11(2):279-285.

共引文献130

同被引文献15

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部