期刊文献+

Radiation damage of 1Cr18Ni9Ti and Zr-Ti-Al alloys due to energetic particle irradiation

Radiation damage of 1Cr18Ni9Ti and Zr-Ti-Al alloys due to energetic particle irradiation
原文传递
导出
摘要 The radiation damage of 1Cr18Ni9Ti stainless steel and the Zr-Ti-Al alloy by 200 keV Xe+ ions bombardment at the fluence ranging from 1×1014 to 8×1015 ions/cm2 has been investigated by conventional transmission electron microscope, X-ray diffraction line profile analysis (XRDLPA) and nanoindentation. XRDLPA shows that the order of magnitude of dislocation density in both materials remains almost unchanged up to the highest irradiation dose. Selected-area electron diffraction combined with bright and dark field image indicates that 1Cr18Ni9Ti is more easily damaged than the Zr-Ti-Al alloy. With increasing the ions fluence, the radiation damage became more severe in 1Cr18Ni9Ti, accompanied with phase transition and partial amorphization. The nano-hardness was found to increase rapidly with increasing ion fluence till the dose of 1×1015 ions/cm2, and then gradually saturate with dose. The enhancement of hardness in irradiated materials is due to irradiation-induced defects acting as barriers to dislocation motion. The radiation damage of 1Cr18Ni9Ti stainless steel and the Zr-Ti-Al alloy by 200 keV Xe+ ions bombardment at the fluence ranging from 1×1014 to 8×1015 ions/cm2 has been investigated by conventional transmission electron microscope, X-ray diffraction line profile analysis (XRDLPA) and nanoindentation. XRDLPA shows that the order of magnitude of dislocation density in both materials remains almost unchanged up to the highest irradiation dose. Selected-area electron diffraction combined with bright and dark field image indicates that 1Cr18Ni9Ti is more easily damaged than the Zr-Ti-Al alloy. With increasing the ions fluence, the radiation damage became more severe in 1Cr18Ni9Ti, accompanied with phase transition and partial amorphization. The nano-hardness was found to increase rapidly with increasing ion fluence till the dose of 1×1015 ions/cm2, and then gradually saturate with dose. The enhancement of hardness in irradiated materials is due to irradiation-induced defects acting as barriers to dislocation motion.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2012年第1期29-39,共11页 金属学报(英文版)
基金 supported by the National Natural Science Foundation of China(Grant No. 50871057) National Basic Research Program of China (Grant No. 2010CB731601)
关键词 Damage structure Zr-Ti-Al alloy 1Cr18Ni9Ti stainless steel XRD TEM IRRADIATION Depth profile Damage structure Zr-Ti-Al alloy 1Cr18Ni9Ti stainless steel XRD TEM Irradiation Depth profile
  • 相关文献

参考文献37

  • 1D.N. Baker, Science 297(5586) (2002) 1486.
  • 2S. Parthiban, E. Elangovan, K. Ramamurthi, D. Kanjilal, K. Asokan, R. Martins and E. Fortunato, J Phys D Appl Phys 44(8) (2011) 0805404-1.
  • 3J.F. Ziegler, J.P. Biersack and U. Littmark, The Stopping and Range of Ions in Solids (Pergamon Press, New York, 1985).
  • 4R.A. Lula, Stainless Steel (American Society for Metals, Metals Park, OH, 1986) p.1.
  • 5K.H. Lo, C.H. Shek and J.K.L. Lai, Mater Sci Eng R 65(4-6) (2009) 39.
  • 6M. Oberndorfer, K. Thayer and M. Kastenbauer, Mater Corros 55(3) (2004) 174.
  • 7L. Vehovar and M. Tandler, Nucl Eng Des 206(1) (2001) 21.
  • 8S. Sahin and M. Ubeyli, J Fusion Energ 27(4) (2008) 271.
  • 9N. Hashimoto, T.S. Byun and K. Farrell, J Nucl Mater 351(1-3) (2006) 295.
  • 10T.S. Byun, N. Hashimoto, K. Farrell and E.H. Lee, J Nuel Mater 349(3) (2006) 251.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部