期刊文献+

齿轮齿廓误差的检测与分析

Detection and Analysis of Gear Tooth Profile Error
下载PDF
导出
摘要 齿轮的齿廓误差是影响齿轮传动平稳性及产生传动噪声的主要因素。在检测齿轮齿廓误差的基础上,分析研究了齿轮的齿廓误差对齿轮传动平稳性和传动噪声的影响,提出了齿轮副综合齿廓误差的概念,认为影响齿轮传动平稳性的是齿轮副的综合齿廓误差。 The gear tooth profile error is the main factor of affecting the transmission smooth and transmission noise. Based on testing gear tooth profile error, this paper has analyzed and researched the effect of transmission smooth and transmission noise which comes from the gear tooth profile error. The concept of gear pair general gear tooth profile error is put forward. It is proposed that the critical factor of affecting transmission smooth of gear is due to the gear pair general gear tooth profile error.
出处 《压缩机技术》 2012年第1期33-34,53,共3页 Compressor Technology
关键词 齿轮 齿廓误差 齿轮副齿廓综合误差 gear gear tooth profile error gear pair general gear tooth profile error
  • 相关文献

参考文献5

二级参考文献16

  • 1张继红,高佑芳,韩星.降低齿轮噪声的创新设计原理[J].机床与液压,2004,32(12):47-49. 被引量:6
  • 2肖利民,唐进元.低噪声齿轮设计方法(一)[J].制造技术与机床,1995(5):30-33. 被引量:20
  • 3聂志峰,聂峻峰,齐宏.机器低噪声设计的研究[J].山东科技大学学报(自然科学版),2005,24(3):24-27. 被引量:1
  • 4太原市金属刀削刀具协会.金属刀削实用刀具技术(第二版)[M].北京:机械工业出版社.2002.
  • 5王学飞.噪声与降噪技术[M].北京:机械工业出版社,1986.P60-75.
  • 6雷光.齿轮制造手册[M].北京:机械工业出版社,1998.P:302-310.
  • 7唐进元,刘欣,戴进.基于ANSYS/LS-DYNA的齿轮传动线外啮合冲击研究[J].振动与冲击,2007,26(9):40-44. 被引量:51
  • 8Winter H, et al. Investigation on the excitation of vibration and noise at spur and helical gears[ C]. Proc of 1989 ASME International Power Transmission & Gearing Conference, Chicago, April, 1989:765--772.
  • 9Munro R G, Morrish L, Palmer D. Gear transmission error outside the normal path of contact due to comer and top contact[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1999,213 (3) :389--399.
  • 10Smith D J. Gear noise and vibration[ M]. New York, Marcel Dekker, 2000 : 1--20.

共引文献64

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部