期刊文献+

气体钻井钻柱疲劳失效周期分析 被引量:7

Contrast of Fatigue Failure Cycles of Drill String during Gas Drilling
下载PDF
导出
摘要 钻柱的频繁失效严重制约着气体钻井的发展。为研究钻柱的疲劳失效周期,以深直井全井钻柱为研究对象,基于疲劳寿命预测的Forman模型,综合考虑深直井钻柱的动力学特性和气体钻井过程中局部热因素对钻柱疲劳寿命的影响,建立了气体钻井钻柱疲劳寿命计算方程。以川西某实钻井为例,利用建立的气体钻井钻柱疲劳寿命计算方程,对气体钻井条件下的钻柱疲劳寿命进行了计算,并与该层段钻井液钻井参数下的钻柱疲劳寿命进行了对比,初步获得了气体钻井与钻井液钻井的钻柱疲劳寿命关系模型。分析结果表明,气体钻井的钻柱疲劳寿命对初始裂纹非常敏感,初始裂纹越大钻柱寿命下降越明显;气体钻井各井段钻柱的疲劳寿命均明显低于钻井液钻井。 The development of gas drilling is restricted seriously because of frequent failure of drilling tools. To study the fatigue failure cycle of drill string, the whole drill string was taken in deepvertical drill ing as research subject. Based on Forman model in drill string fatigue life prediction, and taking considera tion of the dynamic characteristics of drill string and the effect of local thermal factors on drill string fa tigue life in gas drilling, the calculation equation of drill string fatigue life in gas drilling was established. Taking a real borehole in the west of Sichuan province as an example, the fatigue life of drill string in gas drilling was calculated with the established equation, then compared with that in mud drilling. Consequent- ly,the relationship model of the fatigue life in gas and mud drilling was obtained. The results showed that the fatigue life of drilling tools was very sensitive to the initial crack. The initial crack develops larger, the fatigue life drops sharper. The fatigue life of drill string in each interval in gas drilling was obviously lower than that in mud drilling.
出处 《石油钻探技术》 CAS 北大核心 2012年第1期42-46,共5页 Petroleum Drilling Techniques
基金 国家科技重大专项"钻柱-PDC钻头-岩石系统动力学仿真技术研究"(编号:2008ZX05022-005-006HZ) 国家自然科学基金项目"气体钻井钻具与井壁碰摩机理及量化评价方法研究"(编号:50804040) "气体钻井技术基础研究"(编号:51134004)部分研究内容
关键词 气体钻井钻柱疲劳Forman模型失效周期 gas drilling drill string fatigue Forman model failure cycle
  • 相关文献

参考文献16

  • 1Baryshnikov A,Calderoni A,Ligrone A,et al.A new approach to the analysis of drillstring fatigue behavior[J].SPE Drilling&Completion,1997,12(2):77-84.
  • 2邹海洋,狄勤丰,姚建林,胡以宝.气体钻井钻柱失效机理分析[J].石油钻探技术,2008,36(3):55-58. 被引量:19
  • 3Burgess T M,McDaniel G L,Das P K.Improving BHA tool re-liability with drillstring vibration models:field experience and imitations[R].SPE/IADC16109,1987.
  • 4Li Zifeng,Guo Boyun.Analysis of longitudinal vibration of drill string in air and gas drilling[R].SPE107697,2007.
  • 5Howard J A,Halbert M E,Lubinski A.Systematic tracking of fatigue and crack growth to optimize drillstring reliability[R].SPE/IADC25775,1993.
  • 6Bailey E I,Smith J E.The goodman diagram as an analytical tool to optimize fatigue life of rotary shouldered connections[R].SPE79874,2003.
  • 7Hossain M M,Rahman M K,Rahman S S,et al.Fatigue life evaluation:a key to avoid drillpipe failure due to die-marks[R].IADC/SPE47789,1998.
  • 8Hill T H,Ellis S E,Lee K,et al.An innovative design approach to reduce drillstring fatigue[J].SPE Drilling&Completion,2005,20(2):94-100.
  • 9Wu Jiang.Drill-pipe bending and fatigue in rotary drilling of horizontal wells[R].SPE37353,1996.
  • 10李文飞,管志川,赵洪山,牟蕾.钻柱疲劳累积损伤的计算方法[J].中国石油大学学报(自然科学版),2008,32(3):60-62. 被引量:7

二级参考文献37

共引文献64

同被引文献86

引证文献7

二级引证文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部