摘要
以柱撑粘土为载体,制备了Mo-Ni/Al-Fe-PILC和Mo-Ni/Al-PILC加氢脱硫催化剂,在50mL微型固定床反应评价装置中对FCC汽油进行加氢脱硫研究。结果表明:Mo-Ni/Al-Fe-PILC和Mo-Ni/Al-PILC 2种催化剂具有较好的加氢脱硫效果,脱硫率达到75%以上,最佳的工艺条件为反应温度340℃,反应压力6.0MPa,空速为4.0h-1。
Mo-Ni/A1-Fe-PILC and Mo-Ni/A1-PILC hydrodesulfurization catalysts were prepared by PILC used as the carrier and the catalyst effect was evaluated in 50 mL fixed-bed reactor,for the FCC gasoline hydrodesulfurization. The results showed that Mo-Ni/A1-Fe-PILC and Mo-Ni/A1-PILC had good hydrodesulfurization effect, the desulphurization rate reached more than 75 ~, the optimum tech- nological conditions for the reaction were as follows: temperature 340 ~C, reaction pressure 6.0 MPa, airspeed 4.0 h-1.
出处
《化工科技》
CAS
2012年第1期34-36,共3页
Science & Technology in Chemical Industry
关键词
柱撑粘土
加氢脱硫
FCC汽油
脱硫率
加氢工艺
PILC Hydrodesulfurization The FCC gasoline Desulphurization rate Hydrogenationprocess