期刊文献+

HRBF500细晶粒带肋钢筋在人防工程中的应用探讨 被引量:1

Discussion on Application of HRBF500 Grain Reinforcement in the Civil Air Defense Work
原文传递
导出
摘要 人防工程的净空要求是影响平战结合的突出问题,现有设计存在造价较高且施工不便等缺点。通过介绍HRBF500细晶粒带肋钢筋的材料特性,计算其材料的强度设计值及材料提高系数,为人防工程设计中采用HRBF500细晶粒带肋钢筋提供了理论依据。结合实际工程,就框架梁采用传统的HRB335级钢筋同采用HRBF500细晶粒带肋钢筋进行配筋和截面的对比,结果表明:在梁宽和配筋不变的条件下,新材料可以有效减小梁高。HRBF500细晶粒带肋钢筋这种高新材料的应用,在人防工程中具有较大的推广价值。 The clearance requirement of civil air defense work is a critical question;the existing design leads to higher cost and inconvenience in construction.Through introduction of the material properties of HRBF500 grain reinforcement,the design value of strength and the coefficient of strength can provide theoretical base for civil air defense work design for the future use of HRBF500.Based on the practical projects,in comparison of the frame beam using the HRB335 and C40,with HRBF500 and C40 in both reinforcement and cross-section,the results show that with the beam width and same reinforcement amount,the new material can effectively reduce the high of the beam.The new material has a long-term significance in the civil air defense work.
出处 《建筑科学》 北大核心 2012年第3期83-85,82,共4页 Building Science
基金 863计划项目(2008AA030704 2008AA032550)
关键词 HRBF500细晶粒带肋钢筋 人防工程 框架梁 净空 HRBF500 gain reinforcement civil air defense work frame beam clearance
  • 相关文献

参考文献5

二级参考文献18

  • 1[1]Rune Lagneborg.Steel Development Review and Prospects for Future.Scandinavian J.Metall.,1997,26(6):255~265.
  • 2[2]World Steel.Tread & Outlook for World Crude Steel Production to the Year 2010.Steel Times,1997,21(5):51~57.
  • 3[3]Environment.Steel for Sustainable Development-A Report on the IISI Conference,Encosteel 1997,Steel Times,1997,21(4):38~42.
  • 4[4]Helen N Han.The Environmental Impact of Steel and Aluminum Body-in-Whites.JOM,1996,48(2):33~38.
  • 5[5]George E Dieter.ASM Handbook,Vol.20,Materials Selection and Design.ASM International Materials Park,U.S.A,1990:241~328.
  • 6[6]World Steel.Challenges and Opportunities,A Reports on the 3rd FT/CRU Conference Held in London.Steel Times,1997,21(2):45~48.
  • 7[7]Crooks M J,Miner R E.The Ultrolight Steel Auto Body Program Completes Phase I.JOM,1996,48(7):13~15.
  • 8[8]Tsuji N,Saito Y,Tanigawa S,et al. Ultra-fine Grained Bulk Steel Production by Accumulative Roll-bonding (ARB)Process.Scripta Mater.,1999,40(7):795~800.
  • 9[9]Palumbo G,Lehockey E M,LIN P.Applications for Grain Boundary Engineered Materials.JOM,1998,50(2):40~43.
  • 10[10]Badeshia H K D H.High-Strength Steel,Future Development to Metals and Ceramics.J A Charles, London:The Institute of Materials,1992:25~73.

共引文献53

同被引文献3

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部