Stability Analysis of Contact Scanning Probe for Micro/Nano Coordinate Measuring Machine
被引量:2
Stability Analysis of Contact Scanning Probe for Micro/Nano Coordinate Measuring Machine
出处
《纳米技术与精密工程》
EI
CAS
CSCD
2012年第2期125-131,共7页
Nanotechnology and Precision Engineering
基金
国家高技术研究发展计划(863计划)资助项目(2008AA042409)
国家自然科学基金资助项目(50875073)
安徽省教育厅高等学校优秀青年人才基金资助项目(2011SQRL179).
关键词
微纳米三坐标测量机
扫描探头
稳定性分析
传感哭喊中
stability
temperature drift
two-dimensional (2D) angle sensor
Michelson interferometer
micro/nano coordinate measuring machine(CMM)
二级参考文献18
-
1范光照,程方,陈叶金.基于软件误差修正的通用直线工作台的纳米级定位控制(英文)[J].纳米技术与精密工程,2006,4(1):1-9. 被引量:7
-
2Seggelen V, Rosielle J K, Schellekens P C J N, et al. Design of a 3-D CMM with elastically guided z-axis and x, y axis with less than 2 mm Abbe offset [ C ]// Proc of EUSPEN. Eindhoven, the Netherlands, 2002: 29-32.
-
3Enami K, Kuo C C, Nogami T, et al. Development of nanoprobe system using optical sensing [ C ]//IMEKO-XV World Congress. Osaka, Japan, 2000: 345-348.
-
4Cao S, Brand U, Kleine-Besten T, et al. Recent developments in dimensional metrology for microsystenls components [J]. Microsystem Technologies, 2002, 8( 1 ) : 3-6.
-
5Weckenmann A, Peggs G, Hoffmann J. Probing systems for dimensional micro-and nano-metrology [ J ]. Meas Sci Technol, 2006, 17(3) : 504-509.
-
6Chu C L, Chiu C Y. Development of a low-cost nanoscale touch trigger probe based on heads[J]. Meas Sci Technol two commercial DVD pick-up 2007, 18(7): 1831-1842.
-
7Peggs G N, Lewis A J, Oldfield S. Design for a compact high-accuracy CMM [J].CIRP Annals--Manufacturing Technology, 1999, 48(1): 417-420.
-
8Oiwa T, Tanaka T. Miniaturized three-dimensional touch trigger probe using optical fibre bundle [ J ]. Meas Sci Technol, 2005, 16(8): 1574-1581.
-
9Chu C L, Fan K C, Chen Y J. Design of a digital controller for long-stroke submicron positioning stage [ C ]// Proceedings of the 1st International Conference of Positioning Technology. Act-city, Hamamatsu, Japan, 2004: 176-181.
-
10Fan K C, Fei Y T, Yu X F, et al. Development of a low- cost micro-CMM for 3D micro/nano measurements [J].Meas Sci Technol, 2006, 17(3) : 524-532.
共引文献7
-
1黄强先,余惠娟,黄帅,钱剑钊.微纳米三坐标测量机测头的研究进展[J].中国机械工程,2013,24(9):1264-1272. 被引量:15
-
2余惠娟,黄强先,李志渤,史科迪,程真英.石英音叉三维谐振触发定位系统[J].仪器仪表学报,2013,34(10):2351-2357. 被引量:1
-
3董钊,张炜,赵会宁,于连栋.平行双关节坐标测量机的结构参数标定[J].纳米技术与精密工程,2015,13(4):287-292. 被引量:5
-
4冯旭刚,杜翠翠,章家岩.基于光栅应变传感器的纳米测量机探针设计[J].应用光学,2017,38(3):506-513. 被引量:1
-
5陈伟琪,陈艳华,张勇.坐标测量机测头系统的校准研究[J].自动化与信息工程,2019,40(5):17-20.
-
6张亨通,王元元,秦涛,李仁杰.路面三维形貌数字化测量技术研究综述[J].湖北文理学院学报,2023,44(2):72-83.
-
7宫二敏,黄强先,余夫领.共平面二维高精度工作台误差修正与实验研究[J].中国测试,2014,40(4):10-14. 被引量:2
同被引文献35
-
1刘祚时,倪潇娟.三坐标测量机(CMM)的现状和发展趋势[J].机械制造,2004,42(8):32-34. 被引量:36
-
2陈叶金,范光照,刘玉圣.微器件表面3D形貌的新型微/纳米探头测量系统[J].计量学报,2006,27(1):12-17. 被引量:6
-
3Antonio Piratelli-Filho, Lesnau G R. Virtual spheres gauge for coordinate measuring arms performance test [J]. Measurement, 2010, 43(2): 236-244.
-
4Siuda R, Grabowski A. Combined measurements--A way to improve the measurement accuracy of an additive quantity [J]. Measurement, 2012, 45(5): 1165-1169.
-
5Sartori S, Zhang Guoxiong. Geometric error measure- ment and compensation of machines [J]. Annals of theCIRP, 1995, 44(2): 599-609.
-
6Zhang Xiaowei, Li Xinghua, Chen Bo. The parameters calibration and error compensation of circular gratings for parallel double-joint coordinate measuring ma- chine (CMM) [J]. Applied Mechanics and Materials, 2012, 105/106/107: 1899-1902.
-
7Furutani R, Ozaki M. Uncertainty of calibration of 2D planar coordinate measuring machine [J]. Measurement, 2012, 45(3): 427-430.
-
8Fan K C, Fei Y T, Yu X F, et al. Development of a Low-cost Micro-CMM for 3D Micro/Nano Measurements [J].Meas Sci Technol, 2006, 17(3) : 524 -532.
-
9FanKC, Cheng F, Chen Y J, et al. Probe Technologies for Micro/Nano Measurements [ C ]// Institute of Electrical and Electronics Engineers. Proceedings of the 7th IEEE International Conference on Nanotechnology, New York, US, 2007, 989-993.
-
10C|averley J D, Leach R K. A Vibrating Micro-Scale CMM Probe for Measuring High Aspect Ratio Structures [J]. Microsyst Technol, 2010, 16 (8 - 9): 1507 - 1512.
二级引证文献6
-
1王学影,王华,陆艺,张培培.关节臂式坐标测量机参数标定方法[J].农业机械学报,2016,47(6):408-412. 被引量:7
-
2王学影,王华,陆艺,张培培.关节臂式坐标测量机垂直度误差标定方法[J].农业机械学报,2016,47(11):408-413. 被引量:3
-
3张海涛,刘书桂,李杏华,苏智琨.非正交坐标测量机下REVO测头参数及误差标定[J].湖南大学学报(自然科学版),2017,44(10):50-54. 被引量:1
-
4李瑞君,许鹏,唐帅涛,范光照,程真英.高精度微孔测量探头[J].计量学报,2018,39(5):598-604. 被引量:3
-
5张海涛,刘书桂,李杏华,苏智琨.REVO五轴测量系统重构与建模方法研究[J].天津大学学报(自然科学与工程技术版),2017,50(7):753-757. 被引量:1
-
6靳夏文,李瑞君,王鹏宇.基于三维光电传感器的接触式探头优化设计[J].合肥工业大学学报(自然科学版),2019,42(5):617-620.
-
1王琦,陈晓怀,杨洪涛,金飞翔.纳米三坐标测量机的精度设计[J].工具技术,2006,40(7):71-73. 被引量:4
-
2听书新时代——爱国者妙笔1800[J].大众软件,2008(8):15-15.
-
3郁道银,陈晓冬,汪毅,温世杰,李乔.医学超声-OCT内窥成像系统的研究[J].中国科学(G辑),2007,37(B10):75-79. 被引量:3
-
4提供声音和视觉响应的扫描探头[J].电子产品世界,2004,11(06B):44-44.
-
5用微小芯片制造PET扫描探头[J].物理与工程,2006,16(5):63-63.
-
6钱剑钊,黄强先,李瑞君,龚伟,王志伟,王晨晨.纳米三坐标测量机模拟接触式探头的标定(英文)[J].传感技术学报,2012,25(5):604-608. 被引量:1
-
7邢祺,李建,田倬于,赵清学.三坐标测量机检测圆度及同轴度的误差和方法[J].金属加工(冷加工),2012(5):68-69.
-
8奚琳,余晓芬,范伟.新型Nano-CMM二维定位平台“共平面”结构研究[J].工业计量,2007,17(4):1-2. 被引量:1
-
9李启标,陈晓怀.纳米三坐标测量机的导轨直线度误差分离实验[J].黑龙江科技学院学报,2008,18(4):281-284.
-
10程方,费业泰.纳米三坐标测量机接触式测头触发控制[J].光学精密工程,2010,18(12):2603-2609. 被引量:7