期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

超音速电弧喷涂制备镍钛涂层的空蚀性能 被引量：3

Cavitation Properties of NiTi Coating Deposited by Supersonic Arc Spraying
下载PDF
导出
摘要 以1Cr18Ni9Ti为基体,采用超音速电弧喷涂技术制备NiTi涂层,通过扫描电镜、X射线衍射研究了涂层的性能,并用超声波伸缩振动空蚀试验机进行了空蚀试验。结果表明,超音速电弧喷涂NiTi涂层中产生了孔隙和NiO、TiO氧化物相,降低了NiTi的超弹性,使NiTi涂层的抗空蚀性能下降。 NiTi coating was deposited on 1Crl8Ni9Ti stainless steel substance by supersonic arc spraying. The coating properties were studied by SEM and X-Ray diffraction. Caivation erosion test was finished by ultrasonic stretching vibration caviation test machine. The results show that the NiTi coating deposited by supersonic arc spraying generates porosity and NiO and TiO oxidation phase, thus the superelasticity of NiTi is deteriorated. The performance of cavitation erosion resistance of NiTi coating is decreased.
作者 张志萍 周勇 张健
机构地区 西安石油大学材料科学与工程学院 西安交通大学金属材料强度国家重点实验室
出处 《热加工工艺》 CSCD 北大核心 2012年第6期107-109,共3页 Hot Working Technology
关键词 空蚀 NiTi涂层 超音速电弧喷涂 cavitation erosion NiTi coating supersonic arc spraying
分类号 TG174 [金属学及工艺—金属表面处理]
  • 相关文献

参考文献11

  • 1Knapp R T,Daily J W,Hammit F G.Cavitation[M].NewYork:Mc Graw-Hill Book Co.,1970.
  • 2王国刚,孙冬柏,王勇,马光,樊自拴,俞宏英,孟惠民.热喷涂与熔覆技术制备镍基涂层的空蚀性能[J].材料热处理学报,2007,28(6):109-113. 被引量：12
  • 3查柏林,王汉功,杨晖,苏勋家.超音速电弧喷涂技术[J].机械工人（热加工）,2002,26(6):16-18. 被引量：16
  • 4Melton K N,Mercier O.The mechanical properities ofNiTi-based shape memory alloys[J].Acta.Metallurgical,1981,29(2):393-398.
  • 5Man H C,Cui Z D,Yue T M.Corrision properties of lasersurface melted NiTi shape memory alloy[J].ScriptaMaterialia,2001,45(12):1447-1453.
  • 6Hiraga H,Inoue T,Shinura H,et al.Cavitation erosionmechanism of NiTi coating made by laser plasma hybridspraying[J].Wear,1999,231(7):272-278.
  • 7Kim K S,Jee K K,Yeh C H.Effect of oxidation ontransformation and deformation behavior in Ni-Ti alloy[J].TheEuropean Physical Jouranl Special Topics,2008,158:67-71.
  • 8Wu S K,Lin H C,Yeh C H.A comparison of the cavitationerosion resistance of TiNi alloys,SUS304 stainless steel andNi-based self-fluxing alloy[J].Wear,2000,244:85-93.
  • 9Liu W,Zheng Y G,Liu C S,et al.Cavitation erosionCharacteristics of a NiTi alloy[J].Metallurgical and MaterialsTransactions,2004,A35:356-362.
  • 10Holec,Bojda O,Dlouhy A.Ni4Ti3 precipitate structures inNi-rich NiTi shape memory alloys[J].Material Science andEngineering,2006,A182:462-465.

二级参考文献9

  • 1李敏,李惠东,李惠琪,孙玉宗.等离子体表面改性技术的发展[J].金属热处理,2004,29(7):5-9. 被引量：55
  • 2Brennen C E. Cavitation and bubble dynamics[M]. New York: Oxford University Press, 1995.
  • 3Plesset M S, Prosperetti A. Bubble dynamics and cavitation[J]. Annual Review of Fluid Mechanics, 1977, 9:145 - 185.
  • 4Verstak A, Baranovski V. Activated combustion HVAF coatings for protection against wear and high temperature corrosion[C]. Proceeding of the International Thermal Spray Conference, Orlanduo, 2003 : 535 - 542.
  • 5CHEN H, LI H Q. Microstructure and wear resistance of Fe-based coatings formed plasma jet surface metallurgy [J]. Materials Letters, 2006, 60:1311 - 1315.
  • 6Steller K, Krzysztofowicz T, Reymann Z. Effects of cavitation on materials in field and laboratory conditions[R]. ASTM, STP, 1975, 567: 152- 170.
  • 7Odhiambo D, Soyama H. Cavitation shotless peening for improvement of fatigue strength of carbonized steel[ J ]. International of Fatigue, 2003,25 (9-11): 1217 - 22.
  • 8Brujan E A, Nahen K, Schmidt P, et al. Dynamics of laser-induced cavitation bubbles near an elastic boundary[J]. Journal of Fluid Mechanics, 2001, 433: 251 - 281.
  • 9LIU W, ZHENG Y G, LIU C S. Cavitation erosion behavior of Cr-Mn-N stainless steels in comparison with 0Cr13NiSMo stainless steel[J]. Wear, 2003, 254:713 - 722.

共引文献25

同被引文献30

  • 1王引真,孙永兴.热喷涂技术在石油石化工业中的应用与发展[J].石油工程建设,2004,30(4):1-5. 被引量：14
  • 2侯世香,刘东雨,刘宗德,马一民.NiAl金属间化合物的研究概述[J].金属热处理,2007,32(7):60-64. 被引量：23
  • 3赵文轸.材料表面工程导论[M].西安:西安交通大学出版社,2001..
  • 4KAMIYA S, NAGASAWA H. A Comparative Study of the Mechanical Strength of Chemical Vapor-Deposited Di- amond and Physical Vapor-Deposited Hard Coatings[J].Thin Solid Films, 2005, 473:123-131.
  • 5TOMOCHIKA H, HIROYUKI K, TAKAO A. Fabrication of NiTi Intermetallic Compound by a Reactive Gas Laser Atomization Process[J]. Materials Science and Engineer- ing, 2003, 356(1/2): 122-129.
  • 6KARTHIKEYAN J, KAY C M, LINDEMAN J, et al. Cold Spray Processing of Titanium Powder[J].Ceramics Japan, 2000, 32: 255-262.
  • 7DYSHLOVENKO S, PIERLOT C, PAWLOWSKIL, et al. Experimental Design of Plasma Spraying and Laser Treatment of Hydroxyapatite Coatings[J]. Surface and Coatings Technology, 2006, 201(5): 2054-2060.
  • 8HEARLEY J A, LITTLE J A, STURGEON A J. The Effect of Spray Parameters on the Properties of High Velocity Oxy-fuel NiA1 Intermetallic Coatings[J]. Surface and Coatings Technology, 2000,123(2/3): 210-218.
  • 9左霞.热处理炉炉温均温性测试方法及结果评定[J].计测技术,2010,30(3):62-63. 被引量：7
  • 10Shuai Wang,Koichi Tsuchiya,Lei Wang,Minoru Umemoto.Martensitic stabilization and defects induced by deformation in TiNi shape memory alloys[J].International Journal of Minerals,Metallurgy and Materials,2011,18(1):66-69. 被引量：1

引证文献3

二级引证文献2

热加工工艺
2012年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部