期刊文献+

两面高温下钢筋混凝土压弯构件的试验研究 被引量:6

Experimental Research of Reinforced Concrete Members with Flexure and Axial Load in the Two-side High Temperature
下载PDF
导出
摘要 进行了9根两面高温的钢筋混凝上偏心受压构件的试验.结果表明,不均匀高温下的钢筋混凝土偏心受压构件的极限承载力并不一定随偏心距的增加而下降,而是存在一个偏心距不等于零却有最大承载力的极强偏心距点,此点两侧随偏心距的增加构件的极限承载力下降.文中还给出了构件的各种表观现象、破坏形态、侧向挠度和轴向变形等性能随试验温度的变化规律. This article reports an experiment of 9 reinforced concrete members with flexure and axial load and heated on two-surfaces . The result indicates that the ultimate loads of these members may not drop with the increase of eccentricity. However, there is a strongest eccentricity point that has highest ultimate loads , but its eccentricity is not zero. The ultimate load decreases with increase of eccentricity from this point. The varying law of all kinds of apparent appearance, failure pattern, displacement and axial distortion with the increase of experimental temperature are given.
机构地区 清华大学
出处 《建筑结构》 CSCD 北大核心 2000年第2期23-27,共5页 Building Structure
基金 国家自然科学基金(59578033) 高等学校博士点学科专项基金资助项目
关键词 钢筋混凝土 偏心受压构件 极限承载力 变形 试验 high temperature reinforced concrete ultimate load distortion eccentric compression member
  • 相关文献

参考文献2

二级参考文献3

  • 1李华东,硕士学位论文,1994年
  • 2李卫,建筑结构学报,1993年,14卷,1期
  • 3时旭东,博士学位论文,1992年

共引文献53

同被引文献27

引证文献6

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部