期刊文献+

预先再结晶对冷轧双相钢组织性能的影响 被引量:4

Effect of Pre-recrystallization on Microstructure and Property of Cold-rolled Dual Phase steel
下载PDF
导出
摘要 通过实验研究了预先再结晶对冷轧双相钢组织性能的影响。首先通过研究再结晶演变规律确定了预先再结晶的温度和时间分别为700℃保温30s;另外,通过奥氏体形成动力学及相变点检测确定两相区退火工艺参数;最后分析了预先再结晶对冷轧双相钢组织性能的影响。实验表明:冷轧钢板经T=700℃,t=30 s预先再结晶处理后,迅速升温进入双相区热处理可以较好的消除了条带状组织,得到均匀的F+M双相组织,其塑性有了较大幅度的提高,抗拉强度略有上升。 The effect of pre - recrystallization on microstructure and property of cold - rolled du- al phase steel was studied through experimental. The recrystallization temperature and time were identi- fied as 700℃ and 30s, by the evolution of recrystallization;the parameters of intercritical anneal pro- cessing were determined from the transformation kinetics of austenite ;Finally ,The effect of pre -recrys- tallization on microstructure and property of cold - roiled dual phase steel was analyzed. The experimen- tal is indicated that:The cold -rolled steel after pre -recrystallization at T =700℃ ,t = 30 s,Rapid heating to the intercritical temperature, can be better to eliminate the banded organization, and to be u- niform F + M phase organization, with the plasticity is relatively large increase, tensile strength is in- creased slightly.
出处 《安徽冶金科技职业学院学报》 2012年第1期1-4,共4页 Journal of Anhui Vocational College of Metallurgy and Technology
关键词 预先再结晶 冷轧双相钢 微观组织 性能 pre - recrystallization cold rolled dual phase steel microstructure property
  • 相关文献

参考文献4

二级参考文献35

共引文献52

同被引文献23

  • 1崔怀洋,陈铠,左铁钏.镀锌钢板的CO_2激光焊焊接性[J].焊接学报,2004,25(4):115-118. 被引量:23
  • 2雷玉成,朱强,王建中,陈炜.ST14钢激光拼焊板焊缝组织及成形性能分析[J].焊接学报,2006,27(7):25-28. 被引量:14
  • 3胡赓样,蔡珣.材料科学基础[M].上海:上海交通大学出版社,2000.
  • 4黄群飞,何燕霖,李麟.高性能双相钢的研究进展[J].热处理技术与装备,2007,28(3):11-14. 被引量:33
  • 5雷玉成,朱强,陈炜,程晓农.高强度钢差厚板激光拼焊焊缝成形及组织分析[J].焊接学报,2007,28(8):9-12. 被引量:10
  • 6Benedyk J C. Light metals in automotive applications[J]. Light Metal Age,2000,10(1) =34-35.
  • 7Debanshu B. Developments in advanced high strength steels [J]. Iron Steel Supplement, 2005,40 : 69-75.
  • 8B. Yan,K. Laurin,K. Xu,et al. A new dual phase steel for automotive body panels[J]. SAE International, 2003 (1)..5- 18.
  • 9Marion Merklein, Maren Johannes, Michael Leehner, et al. A review on tailored blanks - production, applications and evaluation original research article [ J ] Journal of Materials Processing Technology, 2014, 214(2) : 151 - 164.
  • 10Waterschoot T, Verbeken K, Cooman B C De. Tempering kinetics of the martensitic phase in DP steel[ J ]. ISIJ Inter- national, 2006,46 : 138 - 146.

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部