摘要
标定了一种镀制氧化锆陶瓷薄膜的蓝宝石光纤黑体腔温度传感器。标定系统用氢氧焰枪作为热源,以Modl-ine3红外测温仪作为标准传感器,采用数据采集卡(PCI20612)对被校准传感器和Modline3的输出信号同步采集,通过比较法得到K值。实验验证了该方案的可行性,测得K值为98.578×106(V.m2/W),并得到该传感器温度-电压曲线,系统简单,方便,具有一定实用价值。
A kind of sapphire fiber blackbody cavity temperature sensor which was sprayed by ZrO2 film was calibrated. In this measruement system, hydrogen-oxygen gas flame welding machine was used as heat, Modline 3 infrared themometer was the standard sensor, data acquisition card (PCI20612)collected both of output of the calibrated sensor and Modline3. K was obstained by comparison. Experiments demonstrate the feasibility of this program, the results show K is 98. 578 × 10^4 ( V· m^2/W), and the T-V curve is presented. The calibration system is convenience and practical.
出处
《仪表技术与传感器》
CSCD
北大核心
2012年第2期1-2,7,共3页
Instrument Technique and Sensor
关键词
K值标定系统
蓝宝石光纤温度传感器
红外测温仪
calibration system of coefficient K
sapphire-fiber temperature sensor
infrared themometer