摘要
在确定化学镀Ni-Fe-Co-P镀液配方的基础上,往镀液中加入硝酸铈,在涤沦织物上制备Ni-Fe-Co-P-Ce合金镀层。讨论了硝酸铈的质量浓度对镀层的沉积速率、表面形貌、成分及耐蚀性能等的影响,得出其最佳的质量浓度为0.4g/L。
Based on the established bath of electroless Ni-Fe-Co-P plating, cerium nitrate was added to the bath, and a Ni-Fe-Co-P-Ce alloy coating was prepared on polyester fibers. The effects of the mass concentration of cerium nitrate on the deposition rate, surface morphology, composition, corrosion resistance of the coating were discussed, obtaining an optimal mass concentration as 0.4 g/L.
出处
《电镀与环保》
CAS
CSCD
北大核心
2012年第2期27-30,共4页
Electroplating & Pollution Control
