期刊文献+

首钢高炉高温合金喷煤枪的研制与应用 被引量:4

Development and application of Shougang high temperature alloy PCI lance
下载PDF
导出
摘要 高温合金-陶瓷弯头单体自冷却喷煤枪具有耐磨蚀、抗氧化和抗烧损等优点,枪体的热强度高。与普通不锈钢喷煤枪相比,喷枪使用寿命长,可以有助于增加喷煤量、缓解风口磨蚀、减轻工人劳动强度。首钢5座高炉自1998年8月起开始使用高温合金喷煤枪,取得了明显的成效。 The PCI lance made of high temperature alloy and ceramic bent is wear-resisting,oxide-resisting and heat-resisting. It is high in hot strength. Compared with, normal stainless PCI lance, the lance can increase service time,stabilize PCI operation,raise PCI rate,reduce tuyere abrasion, and decrease worker' s labor significantly. The lance has been used in all five blast furnaces of Shougang since August 1998,and the results are excellent.
出处 《炼铁》 北大核心 2000年第1期24-26,共3页 Ironmaking
关键词 高温合金 喷煤枪 高炉 研制 炼铁 喷煤 high temperature alloy PCI lance blast furnace
  • 相关文献

同被引文献25

  • 1周国凡,傅世敏,康文进.高炉喷煤枪最佳结构参数的试验研究[J].炼铁,1996,15(1):48-50. 被引量:1
  • 2王国雄.现代高炉煤粉喷吹[M].北京:冶金工业出版社,1997,145-170.
  • 3Ishii K.Advanced Pulverized Coal Injection Technology and Blast Furnace Operation[M].Oxford:Elsevier Science Ltd, 2000.
  • 4Sengupta I,Kumar A,Ghosh S,et al.Blast Furnace Efficiency Enhancer for Pulverized Coal Injection[J].AISE Steel Technology,2000,77(2):61.
  • 5Yeh C M,Ho C K,Du S W,et al.The Development of Pulverized Coal Injection Lance With Air Cooling in No.3Blast Furnace[C]∥61st Ironmaking Conference Proceedings.Nashville: Ironmaking Division of the Iron and Steel Society,2002.
  • 6HUANG Xi-hu.Principles of Steel Metallurgy[M].3rd ed. Beijing:Metallurgical Industry Press,2002(in Chinese).
  • 7Briks N,Meier G H,Pettit F S.Introduction to High-Temperature Oxidation of Metals[M].2nd ed.Cambridge:Cambridge University Press,2006.
  • 8LI Tie-fan.High Temperature Oxidation and Hot Corrosion of Metals[M].Beijing:Chemical Industry Press,2004(in Chinese).
  • 9Finnie I,McFadden D H.On the Velocity Dependence of the Erosion of Ductile Metals by Solid Particles at Low Angles of Incidence[J].Wear,1978,48(1):181.
  • 10SHEN Qiao-zhen,DU Jian-ming.Metallurgy Transport Principle[M].Beijing:Metallurgical Industry Press,2006(in Chinese).

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部