期刊文献+

Piezoelectric-based Crack Detection Techniques of Concrete Structures:Experimental Study 被引量:2

Piezoelectric-based Crack Detection Techniques of Concrete Structures:Experimental Study
下载PDF
导出
摘要 Feasibility of a wave propagation-based active crack detection technique for nondestructive evaluations (NDE) of concrete structures with surface bonded and embedded piezoelectric-ceramic (PZT) patches was studied. At first, the wave propagation mechanisms in concrete were analyzed. Then, an active sensing system with integrated actuators/sensors was constructed. One PZT patch was used as an actuator to generate high frequency waves, and the other PZT patches were used as sensors to detect the propagating wave. Scattered wave signals from the damage can be obtained by subtracting the baseline signal of the intact structure from the recorded signal of the damaged structure. In the experimental study, progressive cracked damage inflicted artificially on the plain concrete beam is assessed by using both lateral and thickness modes of the PZT patches. The results indicate that with the increasing number and severity of cracks, the magnitude of the sensor output decreases for the surface bonded PZT patches, and increases for the embedded PZT patches. Feasibility of a wave propagation-based active crack detection technique for nondestructive evaluations (NDE) of concrete structures with surface bonded and embedded piezoelectric-ceramic (PZT) patches was studied. At first, the wave propagation mechanisms in concrete were analyzed. Then, an active sensing system with integrated actuators/sensors was constructed. One PZT patch was used as an actuator to generate high frequency waves, and the other PZT patches were used as sensors to detect the propagating wave. Scattered wave signals from the damage can be obtained by subtracting the baseline signal of the intact structure from the recorded signal of the damaged structure. In the experimental study, progressive cracked damage inflicted artificially on the plain concrete beam is assessed by using both lateral and thickness modes of the PZT patches. The results indicate that with the increasing number and severity of cracks, the magnitude of the sensor output decreases for the surface bonded PZT patches, and increases for the embedded PZT patches.
作者 朱劲松
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2012年第2期346-352,共7页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China (51178305) the Key Projects in the Science & Technology Pillar Program of Tianjin (11ZCKFSF00300)
关键词 concrete structures crack detection health monitoring PZT wave propagation method concrete structures crack detection health monitoring PZT wave propagation method
  • 相关文献

参考文献1

二级参考文献14

  • 1M Saafi, T Sayyah. Health Monitoring of Concrete Structures Strengthened with Advanced Composite Materials Using Piezoelectric Transducers[J]. Composite: Part B, 2001, 32(4):333-342.
  • 2K K Tseng, L S Wang. Smart Piezoelectric Transducers tor In Situ Health Monitoring of Concrete[J]. Smart Mater. and Struct., 2004, 13(5):1 017-1 024.
  • 3C K Soh, S Bhallal Calibration of Piezo-impedance Transducers for Strength Prediction and Damage Assessment of Concrete[J]. Smart Mate1: and Struct., 2005, 14(4):671-684.
  • 4S W Shin, A R Qureshi, J Y Lee, et al. Piezoelectric Sensor Based Nondestructive Active Monitoring of Strength Gain in Concrete[J]. Smart Mater. and Struct., 2008, 17(5):055002.
  • 5S W Shin, T K Oh. Application of Electro-mechanical Impedance Sensing Technique for Online Monitoring of Strength Development in Concrete Using Smart PZT Patches[J]. Constr andBuild. Mater., 2009, 23(2):1 185-1 188.
  • 6R Tawie, H K Lee. Monitoring the Strength Development in Concrete by EMI Sensing Technique[J]. Const~ and Build. Mater., 2010, 24(9):1 746-1 753.
  • 7E G Gonzalo, S P John. The Use of Surface Waves to Estimate In-place Strength of Concrete[J]. Journal of Advance Concrete Technology, 2005, 3(2):355-362.
  • 8H Gu, G Song, H Dh0nde, et al. Concrete Early-age Strength Monitoring Using Embedded Piezoelectric Transducers[J]. Smart Mater. and Struct., 2006, 15(6): 1 837-1 845.
  • 9F Song, G L Huang, J H Kim, et al. On the Study of Surface Wave Propagation in Concrete Structures Using a Piezoelectric Actuator/Sensor System[J]. Smart Mater. and Struct., 2008, 17(5): 055024.
  • 10M Q Sun, W J Staszewski, R N Swamy, et al. Application of Low-profile Piezoceramic Transducers for Health Monitoring of Concrete Structures[J]. NDT&E Inter., 2008, 41(8):589-595.

共引文献4

同被引文献13

  • 1江毅,严云,Christopher K.Y.Leung.光纤光栅腐蚀传感器[J].光子学报,2006,35(1):96-99. 被引量:20
  • 2王礼立.应力波基础[M].北京:国防工业出版社,1983
  • 3GRIMALDI G, BREVET P, PANNIER G, et al.Factors influ- encing electrode potential of steel in concreterJ.British Cor- rosion Journal, 1986,21 (1) 55-62.
  • 4FUHR P L,AMBROSE T P, HUSTON D R,et al.Fiber optic corrosion sensing for bridges and roadway surfaces [C//Pro- ceedings of SPIE-The International Society for Optical Engi- neering. San Diego, CA, USA : Society of Photo-Optical Instru- mentation Engineers, 1995 : 2-8.
  • 5BENNETT K D, McLAUGHLIN L R. Monitoring of corro- sion in steel structures using optical fiber sensors EC//Pro- ceedings of SPIE-The International Society for Optical Engi- neering.San Diego, CA, USA: Society of Photo-Optical Instru- mentation Engineers, 1995 : 48-59.
  • 6WANG C S, CHANG F K. Built-in diagnostics for impact damage identification of composite strueturesC // Procee- dings of the Third International Workshop on Structural Health Monitoring. Boca Raton, Florida, USA: The Chemical Rubber Company Press, 1999: 612-621.
  • 7李俊,吴瑾,高俊启.一种监测钢筋腐蚀的光纤光栅传感器的研究[J].光谱学与光谱分析,2010,30(1):283-286. 被引量:20
  • 8黎学明,陈伟民,黄宗卿,黄尚廉.混凝土结构中钢筋腐蚀监测的光纤传感技术[J].压电与声光,1999,21(1):12-16. 被引量:10
  • 9甘宇宽,施斌,魏广庆,卢毅,张勇,席均.混凝土中钢筋锈胀分布式光纤监测试验研究[J].光纤与电缆及其应用技术,2010(3):27-29. 被引量:7
  • 10朱劲松,何立坤,王诗青.基于PZT波传播法混凝土结构损伤识别的数值模拟[J].混凝土,2011(3):41-45. 被引量:5

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部