期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

模拟过热度对易切削钢9SMn28硫偏析的影响 被引量：1

Simulation on Effects of Superheat on Sulphur Segregation in Free-cutting Steel 9SMn28
下载PDF
导出
摘要 应用有限体积法，耦合溶质场、流场、温度场，模拟了易切削钢9SMn28中硫的分布，研究了过热度对该合金硫偏析的影响。结果显示，S浓度变化随凝固的进行而变化，最大偏析度为2．42，与实际铸件S的分布趋势一致；当易切削钢9SMn28浇注温度在1808-1813K时，最大偏析度略小，偏析略有改善。 Sulphur segregation in flee-cutting steel 9SMn28 during solidification was simulated by the model of coupling solute field, flow field and temperature field, the effects of superheat on sulphur segregation in free-cutting steel 9SMn28 were researched. The simulated results show the change of sulphur concentration is consistent with that of practical castings. The maximum ratio of sulphur segregation is 2.42. The maximum is less when temperature is 1 808 K to 1 813 K.
作者 王金龙 乔爱云 石晓霞 张行刚
机构地区 内蒙古包钢钢联股份有限公司技术中心 内蒙古包钢钢联股份有限公司无缝厂
出处 《铸造技术》 CAS 北大核心 2012年第3期294-297,共4页 Foundry Technology
关键词 硫 宏观偏析 模拟 过热度 易切削钢9SMn28 sulphur segregation simulation superheat free-cuting steel 9SMn28
分类号 TG260 [金属学及工艺—铸造]
  • 相关文献

参考文献12

  • 1T Fujii,D R Poirier,M C Flemings.Macrosegregation in a mul-ti-component low alloy steel[J].Metall Trans B,1979,10(3):331-339.
  • 2I Ohnaka,K Kobayshi.Flow analysis during solidification by the di-rect finite difference method[J].Trans ISIJ,1986,26(9):781-789.
  • 3D R Poirier,K Yeum,A L Maples,A thermodynamic predictionfor microporosity formation in aluminum-rich Al-Cu alloys[J].Met-all Trans A,1987,18(11):1 979-1 987.
  • 4J P Gu,C Beckerman.Simulation of convection and macrosegrega-tion in a large steel ingot[J].Metall Mater Trans A,1999,30(5):1 357-1 366.
  • 5Z Rabovic,M Lalovic,M Tripkovic,et al.Forming of positive so-lidification macrosegregations during steel ingot[J].ISIJ Int,1999,39(4):329-334.
  • 6G Lesoult,C A Gandin,N T Niane.Segregation during solidifica-tion with spongy deformation of the mushy zone[J].Acta Mater,2003,51(18):5 263-5 283.
  • 7D G Eskin,J J Zuidema,V I Savran,et al.Structure formation andmacrosegregation under different process conditions during DCcasting[J].Materials Science and Engineering A,2004,384(1-2):232-244.
  • 8刘东戎,桑宝光,康秀红,李殿中.考虑固相移动的大尺寸钢锭宏观偏析数值模拟[J].物理学报,2009,58(F06):104-111. 被引量：6
  • 9H Combeau,J M Drezet,A Mo,et al.Modeling of microsegrega-tion in macrosegregation computations[J].Metallurical and Materi-als Transactions A,1996,27A:2 314-2 327.
  • 10I Vannier,H Combeau,G Lesoult.Numerical model for predictionof the final segregation pattern of bearing steel ingots[J].Mater SciEng,1993,173(1-2):317-321.

二级参考文献14

  • 1Gouttebroze S, Bellet M, Combeau H 2007 C. R. Mecanique 335 269.
  • 2Jinho L, Kyunho L, Jinho M 2005 ISIJ Int. 45 1151.
  • 3Ahmad N, Combeau H, Desbiolles J L 1998 Metall. Trans. A 29 617.
  • 4Reddy A V, Beckermann C 1997 Metall. Trans. B 28 479.
  • 5Rousset P, Rappaz M, Hannart B 1995 Metall. Trans. A 26 2349.
  • 6Ni J, Inprocera F P 1995 Int.J. Heat Mass Transfer 38 1285.
  • 7Andreas L, Wu M H 2002 Metall. Trans. A 33 3673.
  • 8Wu M H, Andreas L, Andreas B P 2003 Int. J. Heat Mass Transfer 46 2819.
  • 9Wu M H, Andreas L 2006 Metall. Trans. A 37 1613.
  • 10Wang T M, Yao S, Zhu X G 2006 Acta Metall. Sin. 42 584.

共引文献5

同被引文献9

  • 1Fujii T,Poirier D R,Flemings M C.Macrosegregation in a multi-component low alloy steel[J].Metall Trans B,1979,10(3):331-339.
  • 2Ohnaka I,Kobayashi K.Flow analysis during solidification by the direct finite difference method[J].Trans ISIJ,1986,26(9):781-789.
  • 3Poirier D R,Yeum K,Maples A L.A thermodynamic prediction for microporosity formation in aluminum-rich Al-Cu alloys[J].Metall Trans A,1987,18(11):1979-1987.
  • 4Miyazawa K,Schwerdtfeger K.Macrosegregation in continuous cast steel slabs:preliminary theoretical investigation on the effect of steady state bulging[J].Arch Eisenhuttenwes,1981,52(11):415-422.
  • 5Lesoult G.Macrosegregation in steel strands and ingots:characterization,formation and consequences[J].Materials Science and Engineering A,2005,413-414:19-29.
  • 6Combeau H,Drezet J M,MO A,et al.Modeling of microsegregation in macrosegregation computations[J].Metallurical and Materials Transactions A,1996,27A:2314-2327.
  • 7Vannier I,Combeau H,Lesoult G.Numerical model for prediction of the final segregation pattern of bearing steel ingots[J].Mater Sci Eng,1993,173(1-2):317-321.
  • 8Vannier I.Modeling the solidification of steel ingots[D].Nancy:Institute National Polytechnique de Lorraine,1995:47-49.
  • 9王金龙,王福明,李长荣,张炯明.基于CAFE法优化易切削钢9SMn28锰、硅、硫含量[J].铸造技术,2009,30(2):216-221. 被引量：4

引证文献1

铸造技术
2012年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部