摘要
利用ANSYS软件,建立了半刚性基层沥青路面结构三维模型,分析了在相同垂直荷载和3种不同水平荷载作用下,基面层层间接触状态分别处于完全连续、完全光滑和半连续状态时的路面结构最大剪应力。结果表明:随着水平力的增加,沥青面层内的最大剪应力显著增大,且最大剪应力的位置在深度方向上有向上移动的趋势;在相同的水平力作用下,面层和基层层间光滑和半连续状态比完全连续状态时路面结构最大剪应力均有不同程度地增加;路面结构中层间接触条件将增加面层内高应力区的范围。
Using ANSYS software,three-dimensional model of semi-rigid bituminous pavement structure was established,and the maximum shear stress of pavement structure when the interfacing state respectively is completely continuous,completely smooth and semi-continuous was analysed.The results showed that along with the increase of the horizontal force,the maximum shear stress of asphalt surface increased significantly,and the location of the maximum shear stress has the trend of up-moved in depth direction.In the same horizontal force,the maximum shear stress in smooth and semi-continuous has different levels increase compared with completely continuous.The range of high stress area in surface will increase because of the interfacing state in pavement structure.
出处
《武汉理工大学学报》
CAS
CSCD
北大核心
2012年第3期51-54,共4页
Journal of Wuhan University of Technology
基金
陕西省交通建设科技项目(09-20K)
关键词
沥青路面
剪应力
层间接触
半刚性基层
ANSYS
水平力系数
asphalt pavement
shear stress
interfacing state
semi-rigid base
ANSYS
horizontal force coefficient