Modeling and Simulation of Hydraulic Engine Mounts
Modeling and Simulation of Hydraulic Engine Mounts
出处
《机床与液压》
北大核心
2012年第6期1-11,共11页
Machine Tool & Hydraulics
关键词
摘要
编辑部
编辑工作
读者
Hydraulic engine mount
modeling and simulation
vibration analysis
二级参考文献11
-
1邢景棠,周盛,崔尔杰.流固耦合力学概述[J].力学进展,1997,27(1):19-38. 被引量：233
-
2[1]Geisberger A, Hajepour A K, Golnaraghi F. Nonlinear modeling of hydraulic mounts:theory and experiment. Journal of Sound and Vibration, 2002, 249(2):371～397
-
3[2]Kim G, Singh R. Nonlinear analysis of automotive hydraulic engine mount. Transactions of ASME, Journal of Dynamic systems, Measurements, and Control, 1993, 115:482～487
-
4[5]Nomura T, Hughes T J R. An arbitrary Langangian- Eulerian finite element method for interaction of fluid and a rigid body. Computer Methods in Applied Mechanics and Engineering, 1992, 95:115～138
-
5[6]Bathe K J, Hang H, Wang M H. Finite element analysis of incompressible and compressible fluid flows with free surfaces and structural interaction. Computers & Structures, 1995, 56(2/3):193～213
-
6[8]Brooks A N, Hughes T J R. Streamline upwind/petrov- Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations. Computer Methods in Applied Mechanics and Engineering , 1982, 32:199～259
-
7[9]ADINA R & D, ADINA Theory and Modeling Guide-ADIN-A and -F, 2001
-
8[10]Charlton D J, Yang Y, Teh K K. A review of methods to characterize rubber elastic behavior for use in finite element analysis. Rubber Chemistry and Technology, 1994, 67:481～503
-
9[11]Seibert D J, Schoche N. Direct comparison of some recent rubber elasticity models. Rubber Chemistry and Technology, 2000, 73:366～384
-
10范让林,吕振华,冯振东,张建文.惯性通道-解耦膜式液压悬置动特性分析[J].汽车工程,1997,19(4):226-233. 被引量：11
共引文献31
-
1陈志勇,史文库,王清国,滕腾.基于液固耦合有限元分析的驾驶室液压悬置结构参数[J].吉林大学学报（工学版）,2011,41(S2):98-103. 被引量：7
-
2王敏,姚国凤,梁静文,赵建,赵靖洲,秦民,程悦.基于流固耦合FEM的液压悬置关键参数提取[J].哈尔滨工业大学学报,2011,43(S1):158-162. 被引量：5
-
3上官文斌,宋志顺,张云清,蒋开洪,徐驰.多惯性通道型液阻悬置动态特性的实测与分析[J].振动工程学报,2005,18(3):318-323. 被引量：6
-
4张云侠,张建武,上官文斌,高勇军.新型发动机被动液阻悬置动态特性分析[J].上海交通大学学报,2006,40(6):942-946. 被引量：7
-
5上官文斌.液阻悬置惯性通道阻尼特性的实验与计算分析[J].振动工程学报,2006,19(3):376-381.
-
6孙妍,樊文欣,蔡金君.发动机半主动控制液力悬置动特性仿真研究[J].机械研究与应用,2007,20(1):33-35. 被引量：1
-
7上官文斌,徐驰.汽车悬架控制臂液压衬套动态特性实测与计算分析[J].振动与冲击,2007,26(9):7-10. 被引量：27
-
8张云侠,张建武,上官文斌,李光布,冯启山.直接解耦盘式液阻悬置的动力学研究[J].上海交通大学学报,2007,41(9):1406-1410. 被引量：6
-
9黄中华,刘少军,金波,李力,陈鹰.Concentrated and gastight sampling technique of deepsea microplankton[J].Journal of Central South University of Technology,2007,14(6):820-825.
-
10黄中华,金波,刘少军.深海高压舱密封性能评价研究[J].浙江大学学报（工学版）,2007,41(5):790-793. 被引量：16
