摘要
利用CFD软件,采用Realizable k-ε湍流模型,分别在3种工况下,对1台比转数为71的导叶-蜗壳组合式离心泵的内部流动进行三维非定常数值模拟,获取了离心泵内部流场结构,计算泵的扬程及效率。根据计算结果,分析了叶轮转动位置对泵外特性和内流场的影响。结果表明:当叶轮转动位置不同时,泵扬程、效率随之发生变化,选取某一特定位置处结果作为最终预测结果会产生较大的随机误差;叶轮转动位置的不同,也会对叶轮、导叶、蜗壳流道内的压力场和速度场产生一定的影响。
Full three-dimensional numerical simulation of a volute-diffuser combined centrifugal pump are carried out by using CFD under 3 operating conditions.The Reynolds-averaged Navier-Stokes equations are solved with a turbulence model of Realizable k-ε.The flow pattern is obtained.The head and hydraulic efficiency of the pump are calculated.Based on these,an analysis is made of the effect of impeller rotating position.The results show that: The head and efficiency will change periodically along with the impeller rotating position,so selecting a specific location result as the final predicted result will have a greater random error.The pressure filed and velocity field of the impeller,diffuser and volute will also have some impact on the impeller rotating position.
出处
《中国农村水利水电》
北大核心
2012年第4期74-79,共6页
China Rural Water and Hydropower
关键词
数值模拟
导叶蜗壳组合式离心泵
叶轮转动位置
随机误差
numerical simulation
volute-diffuser combined centrifugal pump
impeller rotating position
random error