摘要
无锡市某污水处理厂再生水回用工程近期设计规模为1.0×104m3/d,采用超滤/反渗透主体处理工艺,出水水质达到了《城市污水再生利用工业用水水质》(GB 19923—2005)标准。介绍了处理工艺流程、工程设计参数、设备配置情况等,并总结了设计要点,其经验可供相关设计人员参考借鉴。
UF and RO technologies are adopted in the reuse project of reclaimed water from a sew- age treatment plant in Wuxi with design capacity of 1.0 ×10^4 m^3/d. The effluent quality meets the Reuse of Urban Recycling Water -- Water Quality Standard for Industrial Uses （GB/T 19923 -2005 ）. The process flow, design parameters, equipment allocation and so on are presented, and the design key points are summarized. The experience can provide reference for designers.
出处
《中国给水排水》
CAS
CSCD
北大核心
2012年第8期35-38,共4页
China Water & Wastewater
