期刊文献+

一种基于遥测温度的航天器在轨故障分析方法 被引量:2

Study on Fault Analysis of Spacecraft Based on Telemetered Temperature
下载PDF
导出
摘要 分析设备在轨温度异常变化的3个原因:遥测数据错误、设备周边热边界异常变化和设备内部热状态异常变化,提出用故障树来确定温度异常变化原因的分析方法,并进行实例分析。以某卫星寿命末期蓄电池故障时的遥测温度数据为基础,通过热分析模型进行了多工况的模拟,排除了遥测温度异常、卫星姿态异常、主动控温异常等因素,得出故障是由于电池内部热耗异常增加的结论。 Abnormal telemetered temperature data and the changes of equipments thermal boundary condition and internal thermal status are the reasons why their temperature changes abnormally.The paper presents the special causes of abnormal telemetrered temperature is determined using fault tree analysis and analyzes a special case.On the basis of telemetered temperature data of a satellite battery fault at the end of lifetime,lots of cases are simulated with the thermal analysis model.Analysis results show that the cause of battery fault is the inner heat dissipation increasing abnormally.And some of other causes,such as telemetered temperature being abnormal,satellite attitude being abnormal and active thermal control loops being abnormal,are excluded.
出处 《航天器工程》 2012年第2期56-61,共6页 Spacecraft Engineering
关键词 航天器 故障分析 遥测温度 蓄电池 热耗 spacecraft fault analysis telemetered temperature battery heat dissipation
  • 相关文献

参考文献8

二级参考文献20

  • 1钟奇,文耀普,李国强.近地热环境参数对航天器温度影响浅析[J].航天器工程,2007,16(3):74-77. 被引量:10
  • 2尹朝庆 尹浩.人工智能与专家系统[M].北京:中国水利水电出版社,2001..
  • 3Deb S,Pattipati K R,Raghavan V,et al.Multi-signal flow graphs: a novel approach for system testability analysis and fault diagnosis [J].IEEE Aerospace and Electronics Magazine,1995,10(5): 14-25.
  • 4.[EB/OL].http://www.teamqsi.com,.
  • 5Deb S,Amit M,Pattipati K R,et al.De-centralized real-time monitoring and diagnosis [A].Proc.of IEEE International Conference on SMC[C].1998.2998-3003.
  • 6李金川,郑智慧.空调制冷自控系统运行与管理.北京:中国建材工业出版社,2002.
  • 7杨世铭.传热学(第二版).北京:高等教育出版社,1987.
  • 8西德工程师协会工艺与化学工程学会编.传热手册.北京:化学工业出版社,1983.
  • 9Eckert E R G,Drake R M.传热与传质分析.北京:科学出版社,1983.
  • 10闵桂荣,郭舜.航天器热控制(第二版).北京:科学出版社,1998.

共引文献22

同被引文献46

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部