摘要
海南石碌铁矿曾誉为"亚洲最大富铁矿",其形成和定位与褶皱变形及伴随的剪切和塑性流动等构造密切相关。石碌矿区构造变形大致分为早期(D1)复式向斜的形成时期、晚期(D2)褶皱叠加和剪切变形时期,后者又进一步分为韧—脆性变形(D2a)、脆—韧性变形和层间滑脱断层形成(D2b)以及脆性变形和矿体破坏(D2c)3个阶段。石碌铁矿床受北西—南东向复式向斜及其与北东—北北东向褶皱叠加所形成的横跨或斜跨褶皱严格控制;褶皱过程所伴随的剪切变形和高温塑性流动是富铁矿形成的重要机制。复式向斜轴部、尤其是两期向斜褶皱轴的叠加部位往往可发现厚大富铁矿体。
The Shilu Fe - ore deposit, which is situated at the western Hainan Province of south China, has been reputed as the biggest hematite - rich Fe - ore deposit in Asia. The formation and location of the deposit have close relationship with folds and their incidental shear and plastic flow structures. Based on tectonic styles and deformation mechanism of the orebodies and their host rocks, the strongly structural deformation in the studied ore deposit can be classified into two phases, D1, the early regional - scale synclinori- um formation stage and D2, the late fold superimposition and concomitant shear deformation stage, in which the latter (D2) is further divided into three uninterrupted stages of D2a, D2b and D2c, and represents dynamic transformation from ductile -brittle shear and high - T (temperature) plastic flow to low - T brittle fracture. The ore - bodies are strictly controlled by the NW - SW trending syncli- norium and the superposed folds which were formed due to superposition of the late NE - NNE trending transversal folds on the early synclinorium, whereas the ductile - brittle shear and Concomitant high - T plastic flow were main mechanisms for formation of the hema- tite - rich ore - bodies. Iron - rich ore bodies in the Shilu iron ore deposit often can be found along the synclinorium axis, especially in the positions of the forementioned superposed synclines.
出处
《矿产勘查》
2012年第2期153-164,共12页
Mineral Exploration
基金
全国危机矿山接替资源找矿专项(编号:200646092)
国家自然科学基金项目(编号:40773017)共同资助
关键词
构造变形
褶皱控矿
石碌铁矿床
海南
sructural deformation
fold - controlled ore body
Shilu Fe - ore deposit
Hainan