摘要
建立了测定聚丙烯丝束滤棒成型胶粘剂中As与Pb的稀释直接进样-石墨炉原子吸收光谱法。结果表明:样品稀释20倍、增加120℃的干燥程序能有效避免样品在石墨炉中爆沸,提高分析的精密度;As与Pb的相对标准偏差(RSD)均小于5%,回收率分别为93.5%~104.0%和94.0%~105.3%,检出限分别为0.537μg/L与0.567μg/L。该方法适用于水乳型聚丙烯丝束滤棒成型胶粘剂中As与Pb的测定。
A direct injection-graphite furnace atomic absorption spectrometry(GF-AAS) method for determining arsenic(As) and lead(Pb) in polypropylene tow binder was developed.The results showed that,twentyfold dilution and additional drying process at 120 ℃ effectively avoided sample blasting while boiling in the furnace and improved analysis precision.The recoveries of As and Pb ranged from 93.5% to 104.0% and 94.0% to 105.3%,respectively,with the relative standard deviations(RSD) of 5%.The limit of detection of As and Pb was 0.537 and 0.567 μg/L,respectively.This method is suitable for determining As and Pb in polypropylene tow binders of water emulsion.
出处
《烟草科技》
EI
CAS
北大核心
2012年第4期44-47,共4页
Tobacco Science & Technology
基金
国家烟草专卖局标准制修订项目"烟用聚丙烯丝束滤棒成型胶粘剂"(2010B053)