摘要
采用酸溶液湿法腐蚀和镀制增透、保护膜层的方法,对某型仪表用显示器防护玻璃表面进行了工艺处理,使得表面反射率降低到2%以下,产品可见光波段平均透过率达到86%,表面硬度提高到7.0GPa。产品性能检测和试用情况表明,防护玻璃具有较好的防眩、增透和抗划伤的作用,使用效果良好。
Display protective glasses of a certain type instrument were technically processed by use of wet etching with acid solution and AR protective coating method. The reflectivity of surface was reduced to 2% below, the average transmittance of products was 86% in visible light, and the hardness of surface was enhanced to 7.0 GPa. The products＇ performance testing and trials expressed that, the protective glasses have good antiglare, antireflective, scratch-resistant process and good behaviors.
出处
《现代显示》
2012年第3期18-20,共3页
Advanced Display
关键词
防护玻璃
表面处理
反射率
硬度
protective glasses
surface treatment
reflectivity
hardness
