期刊文献+

方向转角控制车轮差动电动汽车驱动装置设计分析 被引量:1

Drive Device Design of Differential Drive Electric Vehicle Controlled by Steering Wheel Angle
下载PDF
导出
摘要 介绍了四轮独立驱动的电动汽车在国内外的发展现状及前景,同时提出了方向转角控制的车轮差动电动汽车驱动装置的控制方案及整车布局方式,并对方向转角控制的车轮差动电动汽车驱动装置主要技术优势进行了分析. The status and tendency of a four-wheel independent drive electric vehicle in the domestic and international are reviewed,and a control program of drive device and the layout for differential drive electric vehicle controlled by steering wheel angle are proposed.Furthermore,the main technical advantages of differential drive electric vehicle controlled by steering wheel angle are analyzed.
作者 赵文平
出处 《鲁东大学学报(自然科学版)》 2012年第2期190-192,共3页 Journal of Ludong University:Natural Science Edition
关键词 电动汽车 四轮独立驱动 方向转角控制 electric vehicle four-wheel independent drive controlled by steering wheel angle
  • 相关文献

参考文献2

二级参考文献13

  • 1李雅博,张俊智,卢青春.混合动力电动汽车车上CAN网络设计实时性分析[J].汽车工程,2005,27(1):16-19. 被引量:28
  • 2李佳,朱元,田光宇.CAN与TTCAN通信延迟时间的分析[J].清华大学学报(自然科学版),2006,46(2):261-265. 被引量:30
  • 3Sreejith P S, Ngoi B K A. Dry Machining: Machining of the Future[J]. Journal of Materials Processing Technology,2000,101 (1/3) :287-291.
  • 4Diniz A E,Oliveira A J. Optimizing the Use of Dry Cutting in Rough Turning Steel Operations[J]. International Journal of Machine Tools and Manufacture, 2004,44(10) :1061-1067.
  • 5Diniz A E, Micaroni R. Cutting Conditions for Finish Turning Process Aiming: the Use of Dry Cutting [J]. International Journal of Machine Tools and Manufacture,2002,42(8) :899-904.
  • 6Ginting A, Nouari M. Optimal Cutting Conditions When Dry End Milling the Aeroengine Material Ti --6242S[J]. Journal of Materials Processing Tech- nology, 2000,101 (1/3) :287-291.
  • 7Abouelatta O B, Mcidl J. Surface Roughness Prediction Based on Cutting Parameters and Tool Vibrations in Turning Operations[J]. Journal of Materials Processing Technology,2001,118(1/3):269-277.
  • 8Risbood K A,Sahasrabudhe A D. Prediction of Surface Roughness and Dimensional Deviation by Measuring Cutting Forces and Vibrations in Turning Process[J]. Journal of Materials Processing Technology, 2003,132(1/3) : 203-214.
  • 9LEE Ju - Sang, RYOO YJ,LIM Y CI. A neural network model of electric differential system for electric vehicle[ C ]//Procedings of 26th IEEE international Conference on Industrial Electronics ,Control and Instrumentation. 2000,1 : 83 - 88.
  • 10Leen G, Heffernan D. Time - triggered controller area network [ J ]. Journal of Computing & Control Engineering, 2001,12 ( 6 ) : 245 - 256.

共引文献26

同被引文献18

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部