期刊文献+

基于费用最小原则的矮塔斜拉桥索力优化研究 被引量:4

OPTIMIZATION FOR CABLE-FORCE OF EXTRADOSED CABLE-STAYED BRIDGES BASED ON MINIMAL COST PRINCIPLE
原文传递
导出
摘要 针对矮塔斜拉桥的特点,提出了基于拉索和预应力钢筋费用最小的索力优化方法。该方法的思路是以设计强度减去活载及其他荷载效应的应力区间,作为主梁上下缘恒载应力可行区域,引入索力和预应力的影响矩阵,利用调值原理,以拉索和预应力筋的综合费用最小为目标,来解决拉索和预应力筋的优化配置问题。用大型有限元软件ANSYS APDL语言实现了这一功能并进行了实桥验算。研究表明:采用该方法确定的索力和预应力,与原设计相比,其费用约为原设计费用的47.9%。 According to the characteristic of extradosed cable-stayed bridges,an optimization method was put forward to minimize the cost of cables and tendons.The method follows the idea that the feasible stress range of a beam under a dead load is firstly determined by design strength subtracting the stress due to the live load and other actions.The method is aimed at minimizing the total cost of cables and tendons,realized by introducing the influence matrix of cable and tendon forces in a line with the modulating principle.The function is materialized with ANSYS APDL and the optimization theory is examined on a real bridge.The results show that the total optimized cost of cables and tendons is only 47.9% of that of the original design.
作者 陈从春
出处 《工程力学》 EI CSCD 北大核心 2012年第5期141-146,共6页 Engineering Mechanics
基金 上海市教育委员会重点学科项目(J51502) 上海应用技术学院人才引进科研启动项目(YJ2007-12)
关键词 桥梁工程 矮塔斜拉桥 斜拉桥 优化 造价 索力 预应力 bridge engineering extradosed cable-stayed bridge cable-stayed bridge optimization cost cable force prestressing force
  • 相关文献

参考文献11

二级参考文献23

  • 1杜国华,姜林.斜拉桥的合理索力及其施工张拉力[J].桥梁建设,1989,19(3):11-17. 被引量:84
  • 2Kim K S, Lee H S. Analysis of target configurations under dead loads for cable-supported bridges[J ]. Computers & Structures, 2001,79(29 -30) :2681 - 2692.
  • 3Wang P H,Tseng T C, Yang C G. Initial shape of cable-stayed bridges[ J ]. Computers & Structures, 1993,47 (1) : 111 - 123.
  • 4肖汝诚,博士学位论文,1996年
  • 5陆楸,中国公路学报,1990年,1期,1页
  • 6杜国华,桥梁建设,1989年,3期,18页
  • 7范立础,重庆交通学院学报,11卷,1期,1页
  • 8肖汝诚,1996年
  • 9郭文复,1994年斜拉桥国际学术讨论会论文集,1995年,532页
  • 10陆楸,中国公路学报,1990年,1期,1页

共引文献408

同被引文献25

引证文献4

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部