期刊文献+

硅基外延GaAs材料的力学仿真分析

Mechanical simulation analysis of the Si epitaxial GaAs
下载PDF
导出
摘要 Si,GaAs,Si基异质外延GaAs三种材料的基本力学特性各有不同,通过理论计算和ANSYS仿真得出相同条件下Si基异质外延GaAs材料中GaAs应力转化率是Si和GaAs材料的1.26倍左右,应力造成的位移系数略小于Si,远远小于GaAs,同时经过计算得出Si基异质外延GaAs材料的量程是GaAs材料的5倍,说明Si基外延GaAs材料不仅机械特性良好,而且还明显优于Si和GaAs,有更好的力电耦合效应需要的机械特性。 The basic mechanical properties of materials of Si,GaAs and Si epitaxial GaAs are different.Using the theoretical calculation and ANSYS simulation the strain conversion rate of Si epitaxial GaAs is 1.26 times large than that of Si materials under the same conditions.The displacement coefficient is slightly less than Si,far less than GaAs materials.Meanwhile,the range of Si epitaxial GaAs is 5 times than GaAs materials by calculated.That means the mechanical properties of Si epitaxial GaAs is obviously better than the materials of Si and GaAs and a better force electric coupling effect.
出处 《传感器与微系统》 CSCD 北大核心 2012年第5期37-39,43,共4页 Transducer and Microsystem Technologies
基金 国家自然科学基金重点资助项目(50730009) 国家自然科学基金面上项目(61171056)
关键词 Si基异质外延GaAs材料 应力转化率 位移系数 力电耦合效应 Si epitaxial GaAs stress conversion rate displacement coefficient force electric coupling effect
  • 相关文献

参考文献5

  • 1Miao J M, Hartnage H L. Micromachining of three-dimensional GaAs membrane structures using high-energy nitrogen implantation [ J ]. J Micromech Microeng,2003 ,13 :35 -39.
  • 2Soga T, Arokiaraj J, Taguchi H, et al. Growth of stress-reduced GaAs on Si substrate by using epitaxial lift-o and MOCVD regrowth [ J ]. Jounal of Crysral Growth,2000,221:220 -224.
  • 3Carlin J A, Ringel S A, Fitzgerald A, et al. High-lifetime GaAs on Si using GeSi buers and its potential for space photovoltaics [ J ]. Solar Energy Materials & Solar Cells, 2001,66:21-30.
  • 4Gil-lafon E, Videcoq A, Napierala J. High-quality GaAs-ralated lateral junctions on Si by conformal growth[ J]. Optical Materials, 2001,17:267 -270.
  • 5李亚山,闫俊杰,刘俊,石云波.微机械陀螺封装应力研究[J].传感器与微系统,2011,30(4):25-27. 被引量:4

二级参考文献7

  • 1施芹,苏岩,裘安萍,朱欣华.硅微机械陀螺仪封装应力研究[J].电子器件,2007,30(6):2294-2296. 被引量:5
  • 2谭一云,于虹,黄庆安,刘同庆.温度对硅纳米薄膜杨氏模量的影响[J].电子器件,2007,30(3):755-758. 被引量:12
  • 3Madni A M,Costlow L E,Knowles S. Common design techniques for BEI gym-chip quartz rate sensors for both automotive and ae- rospace/defense markets [ J ]. IEEE Sensors Journal, 2003, 3 (5) :569 -578.
  • 4Qiu A P,Su Y,Wang S R,et al. Effect of residual stress on mi- cromachined Z-axis vibrating rate gyroscope [ C ]//Int' 1 Conf on Measurement Technology and Intelligent Instruments, 2005 : 1197 - 1196.
  • 5Trusov A A, Schofield A R, Shkel A M. Performance characteriza- tion of a new temperature-robust gain-bandwidth improved MEMS gyroscope operated in air [ J ]. Sensors and Actuators A, 2009, 155 : 16 -22.
  • 6Li Xinxin, Ono T, Wang Yuelin, et al. Study on ultra-thin NEMS cantilevers-high yield fabrication and size-effect on Young' s modulus of silicon[ C ]/ylEEE International Conference on Micro- Electro-Mechanical-System,2002:427 -430.
  • 7满海鸥,肖定邦,吴学忠,陈志华,侯占强.硅微陀螺模态频率温度特性的研究[J].传感技术学报,2009,22(8):1117-1121. 被引量:9

共引文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部