期刊文献+

改变散射体RCS方向特性的有源加载方法研究 被引量:1

Study of The Active Loading Method Changing The RCS Direction Characteristics of Scatter
下载PDF
导出
摘要 散射体的雷达横截面积(RCS)随着观测角度的不同而发生变化。对高频区的散射体电磁散射特性进行了建模,根据各个散射中心的位置关系和信号入射角度,计算散射体在特定方向上的RCS。提出了集中式和分布式的有源加载方法改变散射体RCS方向特性,通过施放有源干扰信号使散射体在特定方向上的RCS方向图出现凹点。仿真结果表明,该方法可以有效改变散射体的RCS方向特性,在特定方向上实现散射体射频隐身。 The radar cross section(RCS) of scatterers varies with different observation angles. The electromagnetic scattering characteristics of scatterers in high frequency region is modeled, according to the position relationship of each scattering center and the angle of the incident signal, the RCS of the scatterer on the given direction can be computed. Centralized and distributed active loading methods changing the RCS directivity characteristics of scatterers are presented, and the RCS pattern of the scatterer on the given direction can be zeroed through emitting active jamming signal. The simulation result indicates that this method can change the RCS directivity of scatterers effectively and can be used in radio frequency stealth of the scatterer on the given direction.
机构地区 中电集团第
出处 《舰船电子对抗》 2012年第2期12-14,19,共4页 Shipboard Electronic Countermeasure
关键词 隐身技术 雷达横截面积 电子对抗 有源干扰 stealth technology radar cross section electronic countermeasures active jamming
  • 相关文献

参考文献4

二级参考文献10

  • 1姜文利,柯有安.信号极点估计的状态空间方法[J].北京理工大学学报,1995,15(2):193-198. 被引量:1
  • 2王卫东,博士学位论文,1994年
  • 3Baum C E,Proc IEEE,1991年,79卷,10期,1481页
  • 4Chuang C W,IEEE Trans AES,1986年,12卷,9期,583页
  • 5赵国庆.雷达对抗原理[M].西安:西安毛子科技大学出版社,2000..
  • 6丁鹭飞 耿富录.雷达原理[M].西安电子科技大学出版社,2000..
  • 7张云飞 武哲 陆柱蕙.导弹的RCS计算研究.北京航空航天大学学报,2000,26(3):325-328.
  • 8N N Youssef.Radar corss section of complex targets[C].proc.IEEE.1989,77 (5):722-734.
  • 9J M Rius,M Ferranda and L Jofre.High frequency RCS of complex radar targets in real time[J].IEEE Trans.AP.1993,41(9):1308-1319.
  • 10朱贤阳,杨儒贵,陈益邻.复杂目标雷达散射截面计算方法的新进展[J].电波科学学报,1998,13(3):322-328. 被引量:12

共引文献30

同被引文献4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部