期刊文献+

一种虫草分离菌菌丝体主要有效成分分析 被引量:11

Analysis on effective components in mycelia of AT01,a strain isolated from Acremonium terricola in submerged fermentation
下载PDF
导出
摘要 对虫草分离菌 AT0 1的深层发酵菌丝体进行了有效成分分析 ,其结果表明 :菌丝体中氨基酸种类和冬虫夏草生药一致 ,但氨基酸总量和必需氨基酸总量明显高于冬虫夏草生药 ,必需氨基酸占总氨基酸的比例也高于后者 ,必需氨基酸中苏氨酸、缬氨酸、异亮氨酸、亮氨酸、赖氨酸的含量更远远高于后者 ;菌丝体中粗蛋白、总糖及甘露醇的含量均高于冬虫夏草生药 ;菌丝体的脂肪酸组成中 ,不饱和脂肪酸占脂肪酸组成的 85 .3 8% ,其中亚油酸、亚麻酸等多价不饱和脂肪酸占脂肪酸组成的 5 8.87% ,而亚油酸的含量占整个脂肪酸组成的一半以上 (5 1 .0 4% ) ;发酵菌丝体含有丰富的对人体健康非常重要的 Zn、Fe、Ca等金属元素 ,尤以 Analysis on effective components in the mycelia derived from submerged fermentation of AT01,an isolate from Cordyceps sp.showed that the contents of amino acids,raw protein,total sugar and mannite were higher than those in Cordyceps sinensis fruit bodies and cadavers;unsaturated fatty acids were 85.38%of the total fatty acid,and polyunsaturated fatty acids were 58.87%of the total fatty acid.Some important metallic elements such as Zn,Fe,Ca,etc.were rich in the mycelia.
机构地区 安徽农业大学
出处 《森林病虫通讯》 北大核心 2000年第2期7-9,共3页 Forest Pest and Disease
关键词 虫草 菌丝体 氨基酸 发酵 中药材 地顶孢霉 Cordyceps sp. mycelia effective component
  • 相关文献

参考文献10

二级参考文献45

  • 1ZHANG Zuoyi,YU Suyuan.Future HTGR developments in China after the criticality of the HTR-10[J].Nuclear Engineering and Design,2002,218(1):249-257.
  • 2TANG Chunhe,TANG Yaping,ZHU Junguo,et al.Design and manufacture of fuel element for the 10 MW high temperature gas-cooled reactor[J].Nuclear Engineering and Design,2002,218(1):91-102.
  • 3Achenbach E.Heat and flow characteristics of packed beds[J].Experimental Thermal and Fluid Sciences,1995,10(1):17-27.
  • 4Aquaro D,Zaccari N.Pebble bed thermal mechanical theoretical model:Application at the geometry of test blanket module of ITER-FEAT nuclear fusion reactor[J].Fusion Engineering and Design,2005,75:903-909.
  • 5Bauer R,Schliinder E U.Effective radial thermal conductivity of packings in gas flow[J].International Journal of Chemical Engineering1978,18(2):181-204.
  • 6Donne M D,Sordon G.Heat transfer in pebble beds for fusion blankets[J].Fusion Technology,1990,17(4):597-635.
  • 7Nieβen A F,Stocker B.Sana-1code-to-experiment summary description of benchmark[C]//Proceedings of the 3rd IAEA Research Coordination Meeting on Heat Transport and Afterheat Removal for Gas-Cooled Reactors under Accident Conditions.Vienna,Austria:International Atomic Energy Agency,1995.
  • 8Rousseau P G,van Staden M.Introduction to the PBMR heat transfer test facility[J].Nuclear Engineering and Design,2008,238(11):3060-3072.
  • 9Rousseau P G,Du Toit C G,Landman W A.Validation of a transient thermal-fluid systems CFD model for a packed bed high temperature gas-cooled nuclear reactor[J].Nuclear Engineering and Design,2006,236(5):555-564.
  • 10S.S. Bu,J. Yang,M. Zhou,S.Y. Li,Q.W. Wang,Z.X. Guo.On contact point modifications for forced convective heat transfer analysis in a structured packed bed of spheres[J]. Nuclear Engineering and Design . 2014

共引文献22

同被引文献98

引证文献11

二级引证文献133

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部